Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Fence Installation: The Fort Lauderdale Owner’s Guide
ViewLux fence installation in Fort Lauderdale typically runs $3,500 to $9,000 for a full replacement, with parts and labor bundled into one written price before we start. Most owners discover a problem when a panel sags, a post leans after a storm, or the gate won’t close square anymore. The salt air and summer humidity here don’t just age the finish, they work on the fasteners and post footings faster than anyone expects.
The good news: ViewLux fence systems are modular, which means we can usually swap a failed section without tearing out the entire run. We stock common ViewLux-compatible posts, rails, and gate hardware on the truck, and we carry aftermarket equivalents that match the factory dimensions when OEM parts are backordered. Before we order or mount anything, we confirm the profile measurements on your existing fence so you’re not guessing by model number alone.
Which ViewLux Models This Applies To
ViewLux has used a few different rail and post profiles over the years, and the compatibility gotcha most people hit is mixing the original first-generation square-post system with the newer beveled-profile line. They look close from the curb. They do not interchange. If your fence was installed before roughly 2016, there’s a good chance you’re on the older 4×4 post sleeve system, and we’ll match that specifically rather than forcing a newer rail into an old channel.
The fastest way to identify what you have is to look for the small ViewLux imprint on the inside face of the rail end cap, or measure the width across the post. The current residential line runs a 5-inch post face; the older generation is a true 4-inch. We also check the picket spacing. Some ViewLux privacy panels use 7/8-inch tongue-and-groove. Others use a wider 1-1/4-inch reveal. You could order the wrong panel kit in ten minutes online and find out when the truck leaves. We measure everything before a single box is ordered, and we tell you the part we’re matching.
On the OEM-versus-aftermarket question: for structural posts and gate frames, we prefer OEM ViewLux or a supplier we trust for dimensional parity. For pickets and mid-rails, a quality aftermarket equivalent saves real money without changing the look. We’ll show you both prices and let you decide with our recommendation, not a sales script.
Styles & brands we work with
Signs Your ViewLux Fence Installation Is Failing
- The gate drags or won’t close square. This is almost never the hinges. It’s the post settling or the gate frame racking from repeated wind load. Fort Lauderdale afternoon storms shove a gate around hard, and once the frame twists a few degrees, no hinge adjustment fixes it.
- A post leans right after a heavy rain. That points to the footing. A lot of older ViewLux installs in neighborhoods like Victoria Park and Rio Vista used shallower concrete than we’d spec today. Sandy soil plus stormwater equals movement. The post sleeve rarely fails. The ground under it does.
- Pickets rattle in the rail when you put a hand on them. The aluminum channel that holds the picket bottoms was never designed for repeated salt exposure. We see corrosion pitting on those channels within eight to ten years near the Intracoastal, even on fences that look fine from ten feet away.
- White chalky streaks on the rails or posts. That’s the powder coat breaking down. Cosmetic at first, but once water gets under the coating onto bare aluminum, you get pitting, and pitting becomes pinholes and cracking at fastener points.
- Screws backing out of the post caps or rail brackets. Aluminum expands and contracts a lot in South Florida heat. After enough cycles, factory set screws lose their bite and the whole system loosens up. Retightening helps for a season. Replacing the bracket is the permanent fix.
Replacement Cost & What’s Included
A full ViewLux fence installation in Fort Lauderdale lands between $3,500 and $9,000 depending on linear footage, post count, gate hardware, and whether we’re pulling old footings. A typical 150-foot backyard run with one gate and good access sits in the middle of that range. A shorter repair, like swapping two posts and a four-panel section, runs considerably less, and we price it as repair work, not a new install.
Here’s how the numbers typically break down so you can self-qualify before calling:
- Post replacement (each, with new concrete footing): $250 – $450
- Gate frame and hardware replacement: $600 – $1,400
- ViewLux panel section (per 6-foot length, parts and labor): $180 – $320
- Full fence removal and haul-away: $500 – $1,200
- New ViewLux-compatible full installation (per linear foot, installed): $28 – $48
Every price we give you is a written quote before work starts. No “we’ll see how it goes” pricing. The part, the labor, the haul-away, the concrete, the fasteners. All of it on one sheet. And the installation carries our 365-Day Done Right Promise: if anything we touched fails within a year of completion, we come back and fix it at no cost to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can definitely check the obvious things yourself: look for post lean, check if the gate is dragging, and run your hand along the rails for loose screws. That tells you something is off. What’s trickier is diagnosing whether a leaning post just needs re-shimming or the entire footing has to be dug out and re-poured, which determines whether you’re buying a $40 bracket or a $900 repair.
ViewLux fencing is not high-voltage or high-tension dangerous like a garage spring or an electrical panel, so we won’t tell you to stand back from your own fence. But working with a 6-foot aluminum panel in 20-mph sea breeze is how panels get dropped, gates get bent, and fingers get pinched. Digging out an old concrete footing in Fort Lauderdale heat is a full Saturday, not a two-hour chore. If the job is more than tightening screws or replacing a picket, call us at (754) 354-3720. We’ll tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing.
FAQs
A properly installed ViewLux fence in Fort Lauderdale will give you 15 to 20 years of structure, with finish degradation starting around year 8 if you’re within a few miles of the ocean or Intracoastal. Post footings and gate hardware are the first things to go, not the aluminum panels themselves. Salt air eats set screws and coated-steel brackets years before it touches the pickets.
Yes, in most cases. If your panels are intact and the issue is post lean, gate sag, or dead hardware, repair is a fraction of the cost of full replacement. We’ll give you a straight read: if we’re repairing three sections and replacing two posts, that’s repair pricing. If half the run is moving, we’ll be honest that a full replacement makes more sense than chasing problems one post at a time. Call (754) 354-3720 and we’ll tell you which situation you’re in.
A one or two post repair with concrete work is a single day, with cure time before re-hanging the panel. A full residential installation typically runs two to four days depending on footage, gate count, and how much old concrete has to come out. We schedule the work for dry weather when the job depends on concrete. Fort Lauderdale rain in the summer is real, and we don’t pour footings in a downpour.
We keep common ViewLux-compatible fasteners, rail brackets, post caps, and gate hardware on the truck. Full panels and custom-length rails are ordered per job from our parts suppliers, along with OEM ViewLux pieces when your project needs factory-correct parts for structural or warranty reasons. If you’re matching an older system, we confirm the profile measurements before ordering so you don’t pay for the wrong part twice.
Call for a Free ViewLux Fence Estimate in Fort Lauderdale
If your ViewLux fence is leaning, sagging, or just not latching anymore, call (754) 354-3720. We’ll put your free estimate in writing before any work starts, with the part, the labor, and the total price on one page. Isaac Pruett, our owner at Mason Remodeling Co Fort Lauderdale, has been running Fort Lauderdale and the surrounding neighborhoods long enough to know exactly what South Florida weather does to fence systems, and exactly how to fix it. We also work with KraftMaid, Cambria, and Silestone on the interior side, so if that fence failure was the last straw and you’re thinking about bigger changes, we can talk about those too. The estimate is free. The answer is straight.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
