Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Fort Lauderdale Owner’s Guide
If you have a Tremron concrete roof tile that’s cracked, slipped, or worn through, replacement in Fort Lauderdale typically runs between $600 and $2,500 installed, depending on how many tiles are involved and whether the underlayment beneath them needs attention. We stock Tremron-compatible tiles and the flashing, underlayment, and fasteners that go with them, and we can usually match your existing profile the same week you call. Most homeowners discover a problem after a heavy South Florida storm: a water stain on the ceiling, a tile fragment in the yard, or a soft spot they feel underfoot while cleaning gutters.
Here’s what you need to know before you spend a dollar: how to identify your Tremron profile, what actually failed, and what a fair repair costs in this market. We’ll walk you through all of it.
Which Tremron Models This Applies To
Tremron manufactures concrete roof tile in several profiles, and the challenge in Fort Lauderdale is that homes built in the 1980s and 1990s often used profiles that have since been discontinued or renamed. The most common we see are the flat shake and barrel profiles (Miami-Dade and Broward approved for high-velocity hurricane zones), but you can’t assume your neighbor’s tile matches yours even on identical-looking houses. Tremron changed mold dimensions over the years, so a tile from 1995 and a tile from 2015 can look close from the ground and be off by an eighth of an inch in overlap.
Here’s how to identify what you have: look for the manufacturer’s stamp on the underside of a loose tile, or measure the exposed width and the overall length. Take a photo of the tile profile from the side, not just the top. That side silhouette is what tells us whether you have a flat, S-curve, or barrel profile. If your tile has no visible stamp, we can still match it by profile, color, and texture. One compatibility gotcha specific to South Florida: Tremron tiles installed before the 2002 Florida Building Code revision often sit on battens, while newer installations use direct-to-deck fastening. We need to know which yours is before ordering, because the fastener type changes entirely. Mason Remodeling Co Fort Lauderdale is an independent service provider, not affiliated with Tremron, but we install their tiles and aftermarket equivalents that meet Miami-Dade County product approval standards.
Styles & brands we work with
Signs Your Tremron Roofing Is Failing
- Water stains on ceilings or upper walls. This usually means an underlayment breach beneath a cracked tile, not necessarily the tile itself. In Fort Lauderdale, a single cracked tile over a seam can channel rainwater for months before you notice the stain. The fix is rarely one tile; it’s the tile plus the section of underlayment beneath it.
- Tile fragments in gutters or at the base of downspouts. Concrete tiles shed small pieces as they age, especially after wind-driven rain. If you’re finding quarter-sized chips repeatedly, the tile surface is spalling, which means the cement matrix is breaking down from salt air and UV exposure. Spalled tiles lose their protective outer layer and absorb more water each year.
- Slipped or visibly out-of-alignment tiles. A tile that slides down an inch or two usually means a broken or corroded fastener. Fort Lauderdale’s salt-heavy air accelerates fastener corrosion, especially on older galvanized nails that were never upgraded to stainless. One slipped tile stresses the tiles around it and starts a domino effect.
- Visible cracks running across tile faces. Impact from wind-blown debris and thermal expansion are the two big culprits here. A hairline crack that runs through the middle of a barrel tile will widen after another season of wet-dry cycles, and eventually the tile splits in two. If you can see the crack from the ground with binoculars, it’s already past the caulk-and-pray stage.
- Granules or grit washing out of downspouts. Concrete tile doesn’t lose granules like asphalt shingles, so if you see a steady stream of grit, what you’re seeing is the tile surface itself eroding. That’s a systemic issue, not a one-tile problem. It often means the original tile batch was defective or the roof is well past its expected lifespan for this climate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, Tremron tile repair ranges from $600 to $2,500 depending on scope. A single cracked tile replacement with a matching piece typically runs $600 to $900. A section repair with underlayment replacement, new fasteners, and re-bedding runs $1,200 to $2,500. If your roof has reached the point where repair doesn’t make sense, a full roof replacement in this market runs $8,000 to $20,000.
When Isaac Pruett quotes a Tremron job, you get a written price before any work starts, and that number won’t change once we’re on the roof. The price includes the tile or tiles, matching color and profile, mechanical fasteners to current code, underlayment where needed, debris cleanup, and disposal of the old material. We tell you what we found, what it takes to fix it, and what it will cost before we touch a thing. Every Tremron repair carries our written guarantee for 365 days from completion. If something fails inside that window, we come back at no charge.
DIY or Call Us?
Here’s the straight answer: if you’re comfortable on a ladder and just want to identify your tile profile or take photos for a quote, that’s safe and useful. Take clear photos of the tile face, the side profile, and any visible stamps on loose pieces. Check your gutters for fragments. That tells us a lot before we even arrive.
What we don’t recommend is walking a concrete tile roof yourself. Concrete tiles crack under concentrated weight, you can’t tell which tiles are secure by looking, and a fall from even a single-story Fort Lauderdale roof means a hospital trip. Roof work in South Florida also carries a heat factor most people underestimate: tiles hit 140 degrees on an August afternoon. The work itself, including lifting tiles to inspect underlayment and re-bedding with mortar, is genuinely skilled labor. Fastening tiles wrong creates a leak that’s worse than the one you started with. Call (754) 354-3720 and we’ll come out, assess it, and give you a number in writing.
FAQs
Tremron concrete tiles typically last 40 to 50 years in South Florida, but the underlayment beneath them fails much sooner, usually in 15 to 20 years under Fort Lauderdale’s sun and storm cycles. The tile is rarely the first thing to go; the waterproofing layer underneath is. If your roof is approaching that age, expect to replace underlayment before the tiles themselves.
Hairline cracks can sometimes be sealed with a concrete-compatible repair compound in the short term, but in our experience a cracked tile in Fort Lauderdale’s wet-dry cycle will reopen within a season, and the repair costs nearly as much as replacement. We recommend replacing any tile with a crack that runs more than a third of its length. Call (754) 354-3720 and we’ll tell you honestly which side of that line your tile falls on.
A single tile swap takes about an hour once we’re on site with the right piece. A section repair with underlayment work, like re-bedding several tiles and flashing a seam, takes half a day to a full day depending on weather and roof access. We’ll give you a time window with your written quote before any work begins.
We source Tremron-compatible tiles through our supplier network and handle the ordering, matching, and delivery ourselves, so you never have to chase down a tile yard. If a specific discontinued profile isn’t available, we’ll present aftermarket equivalents that meet Miami-Dade product approval standards and match your existing roof. You don’t order anything; that’s our job.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
