Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The Fort Lauderdale Owner’s Guide
We stock and install Tamko-compatible window and door replacement parts across Fort Lauderdale, with weatherstripping and balance jobs typically running $250 – $700 installed and full window or door replacements ranging from $4,500 – $15,000 depending on size, material, and how many openings you’re doing in one go. Most owners discover the failure the same way: a sash that suddenly feels heavy when they lift it, a door that catches or lets daylight through at the corner, or a window that whistles during an afternoon thunderstorm. The good news is most Tamko hardware issues are repairable without tearing anything apart, as long as the right part is matched to the series and installed by someone who’s done a few hundred of these along Broward County’s coast.
One thing up front, because honesty matters: Mason Remodeling Co Fort Lauderdale is an independent service provider. We are not affiliated with Tamko, we don’t claim to be, and we don’t need to be. We buy OEM parts through legitimate supply channels, and when an OEM part is discontinued, we match the spec with a dependable aftermarket equivalent that installs the same way and lasts just as long in Florida’s salt air.
Which Tamko Models This Applies To
Tamko’s window lines have shifted over the years, and the part that fits a vinyl single-hung installed in 2008 won’t necessarily fit a later thermal-break model. The series matters before anything else. Look for a narrow silver or white label on the inside edge of the sash or the frame head. If the label faded, peel back the weatherstripping gently and look for a stamp. Model prefixes matter more than the full catalog number.
The practical compatibility split is this: early 2000s vinyl single- and double-hungs use a block-and-tackle balance system, while many posts-2012 Tamko lines use coil balances with different spring tension ratings. The shoe, the pivot bar, the tilt latch, and the weatherstripping profile are not interchangeable between those two families. We see that mistake at least once a month in Fort Lauderdale, usually after an owner ordered a “universal” part online and it bound up or popped the tilt latch off within a week. Balances are matched by sash weight, not by guesswork, and getting the wrong tension means the window either won’t stay up or fights you every time you close it.
When a window is discontinued, we cross-reference the glass size, frame depth, and balance rating before we quote you a replacement. Aftermarket Cam-Action or Caldwell equivalents often do the job at half the Tamko-branded part price, and we’ll tell you when that’s the honest call. If you have a Tamko patio door, the roller dimensions and axle style are the identifying facts, and getting those wrong means a door that drags, grinds, or jumps the track.
Styles & brands we work with
Signs Your Tamko Windows & Doors Is Failing
- You feel a sudden catch or drag when lifting or lowering the sash. This is usually the pivot bar slipping out of its shoe, or a balance tube beginning to fail internally. Left alone, the sash will eventually drop hard enough to crack the frame or the glass.
- The window won’t stay open past halfway. That’s a balance tension problem, plain and simple. Florida’s humidity accelerates corrosion on the internal spring, and once it loses tension the window only gets worse, never better.
- Air and moisture come through the closed gap, especially on the east-facing side of the house. Tamko’s older weatherstripping shrinks from salt exposure faster than inland sites. Once that bulb seal flattens, you are paying to air-condition the street.
- A sliding door grinds on the track or leans inward at the top. Rollers are shot or the adjustment screw is stripped. In Fort Lauderdale, track corrosion from concrete-adjacent moisture is a common killer, and replacing the rollers before the track itself gets scored saves you a thousand dollars later.
- The tilt latches snap off or the sash won’t click back into place after cleaning. It is not that you used too much force. The plastic in those latches gets brittle in our UV and heat cycles, and they simply break along the mounting cap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Tamko-specific part swap in Fort Lauderdale, plan on $250 – $700 for weatherstripping, tilt latches, pivot bars, or a standard balance pair on a single window. Full window replacement runs $4,500 – $15,000 when you are doing multiple openings, and impact-rated installations run $8,000 – $25,000 depending on size and permitting requirements in your part of the city.
What drives the range on a typical service call: whether the sash has to come out completely to replace the balance, whether the frame shows water damage or rot once we get in there, and whether we are matching an OEM part or installing a proven aftermarket equivalent. We give you a written price before any work starts, and that number includes the part, the labor, the trip, and the cleanup. It never includes a surprise change order. Our workmanship on parts and hardware is covered by a written guarantee, and if our work fails, you call one number and we come back and make it right at no charge.
DIY or Call Us?
Replacing a tilt latch or running a piece of replacement weatherstripping is something we have walked owners through on the phone with good results. You can also safely clean a track, clear a drain hole, and adjust a sliding door’s height screws with a little patience.
Where a homeowner gets hurt or creates a bigger bill: pulling the sash to replace a balance without knowing how to release the tension, and replacing patio door rollers with the panel still on the track. Sashes are heavy and the balance under tension is not forgiving. A dropped sash will shatter glass on the way down, and a panel that tips as it comes out can take out a screen, a track, or a hand. If you are not certain, call (754) 354-3720 and we’ll quote the job over the phone before we ever step in the door.
FAQs
Expect 10 – 15 years from balances and weatherstripping in a typical Fort Lauderdale home, though east-facing windows in salt-heavy air can need service in 8 years. After that, the failure curve climbs fast, and we tell owners the same thing on every inspection: replacing the balance pair before the sash drops is the cheap part. Call (754) 354-3720 for an honest assessment, and we will tell you what is urgent and what can wait.
Some can, most can’t. Tilt latches and pivot bars are replace-on-sight items because the plastic embrittles and a repaired one just breaks again. Balances can sometimes be re-tensioned rather than swapped, but if the internal spring is rusted or the tube is scored, replacement is the only repair that lasts. Call (754) 354-3720 and we will give you the straight answer before any work starts.
A standard balance-and-latch replacement on one window runs about 90 minutes from arrival to cleanup. A sliding door roller replacement typically takes around two hours, and any repair that requires a full window unit change is a half-day in most Fort Lauderdale homes.
We stock common balance ratings, tilt latches, pivot bars, weatherstripping profiles, and door rollers for the Tamko series we see most often across Fort Lauderdale. For unusual or discontinued sizing, we order and have the correct part within a few days. Call (754) 354-3720 with your model number and we will tell you right then what we have and what we need to order.
If your Tamko window or door is failing and you want a straight answer on the fix and the price, call (754) 354-3720 today for a free estimate. We will tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. We also stock parts and hardware for KraftMaid cabinetry, Cambria and Silestone surfaces, and the other brands Fort Lauderdale homeowners trust, which means fewer trips and fewer delays when the job involves more than one system.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
