Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If your Sterling kitchen in Fort Lauderdale has a failing cabinet hinge, a cracked sink basin, or drawers that no longer glide the way they should, you’re in the right place. A full Sterling kitchen remodel in Fort Lauderdale typically runs $14,000 to $45,000 installed, but when only a specific component has failed, we match the exact Sterling part and install it without tearing out the rest of your kitchen. Most owners discover the problem the same way: a drawer that suddenly needs two hands to close, a sink that won’t drain right because the basin has warped, or cabinet doors that hang a quarter-inch lower than they did last year.
We’re Mason Remodeling Co Fort Lauderdale, and before we talk parts, let’s be clear about one thing. We are an independent remodeling and repair provider. We are not affiliated with Sterling, and we don’t claim to be. What we do is install and service Sterling kitchen components every month across Fort Lauderdale, from Victoria Park to Coral Ridge to Rio Vista, and we keep the commonly failed parts on hand so you’re not waiting three weeks for a special order.
Which Sterling Models This Applies To
Sterling kitchens in Fort Lauderdale homes fall into a few recognizable lines, and the part you need depends on which one you have. The most common lines we see are the Sterling Ensemble and the Sterling Accord series, which use slightly different cabinet box depths and different hinge seat patterns. Before you order anything, open one cabinet door and look at the inside of the hinge cup. Sterling stamps a two-letter code there – if you see “SA,” it’s an Accord line hinge and you need the 35mm half-overlay. If you see “SE,” it’s an Ensemble hinge with a 40mm full-overlay seat. Mixing those up is the most common parts mistake we see in Fort Lauderdale, and it leaves doors that never quite close flush.
On the OEM versus aftermarket question, our honest position is this: for hinges, drawer slides, and sink clips, the OEM Sterling part is worth the extra money because the tolerances match the existing mounting holes. For cabinet box panels and filler strips, a quality aftermarket equivalent from a cabinet supply house in Broward County works fine and costs about 20 to 30 percent less. We’ll tell you which route makes sense before you spend a dollar.
Styles & brands we work with
Signs Your Sterling Kitchen Remodeling Is Failing
- Drawer slides that catch halfway through the pull. The ball-bearing retainers inside Sterling’s soft-close slides wear down after eight to ten years of daily use, especially in Fort Lauderdale’s humidity, which accelerates corrosion on the steel races.
- A sink basin that has a hairline crack around the drain flange. Sterling’s composite sinks from the early 2010s are prone to stress fractures right at the drain seat, usually from over-tightened disposal mounts. This is a replace-the-basin situation, not a patch job.
- Cabinet doors that no longer align with their neighbors. When the hinge leaf plates strip out of the particleboard cabinet face, the door drops. Tightening the screws only works once or twice before the holes wallow out completely.
- Soft-close dampers that slam instead of whisper. The damper cylinder inside Sterling’s hinge cup loses its hydraulic fluid over time. You’ll hear the cabinet door hit the frame with a sharp crack, especially in the quieter morning hours.
- Warped shelf boards inside upper cabinets. Fort Lauderdale’s wet season pushes moisture into unsealed shelf board edges. Sterling shelves from the factory have only a light edge banding, and once they bow, they never flatten back out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest pricing picture for Fort Lauderdale. A full Sterling kitchen remodel runs $14,000 to $45,000, driven mostly by cabinet count, countertop surface choice, and whether we’re moving plumbing or electrical. A smaller kitchen, the kind you find in a Victoria Park bungalow, usually lands between $9,000 and $20,000. If you’re only replacing components, expect cabinet installation to run $4,000 to $13,000, countertops $2,000 to $6,500, and a backsplash $800 to $2,500.
Every price we give is a written number before any work starts. The quote includes the parts, the labor, the haul-away of the old components, and the cleanup. If we open a cabinet and find something unexpected behind it, we stop and tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. Your work is covered by our 365-day Done Right Promise: if anything we installed isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
Replacing a drawer slide or a hinge is something a handy homeowner can do with a screwdriver and fifteen minutes. If the part number matches and the holes line up, there’s no safety risk there. What we’d caution against is anything involving the sink drain flange, the garbage disposal mount, or any cabinet box that has water damage behind it. When a Sterling sink basin crack is involved, you’re working around the drain pipe and the disposal, and if the seal isn’t set right, you’ll have a slow leak inside the cabinet that you won’t notice until the floor of the cabinet rots out. In Fort Lauderdale, with the humidity we deal with, that rot sets in faster than you’d think.
If you’re not sure, call us at (754) 354-3720. We’ll ask a few questions about the symptom and tell you over the phone whether it’s a DIY fix or a job worth scheduling. No charge for the conversation.
FAQs
Sterling cabinets in Fort Lauderdale typically last 15 to 20 years before the hinge seats, drawer slides, or shelf boards start failing, though the humidity here tends to shorten the life of particleboard components by a few years compared to drier climates. If yours are more than 12 years old and showing multiple symptoms from the list above, a full kitchen remodel may cost less in the long run than chasing individual repairs. Call (754) 354-3720 for a free assessment, and we’ll give you an honest read.
No, a Sterling hinge with a worn damper or a stripped leaf plate cannot be repaired in place; the hinge must be replaced because the internal components are not serviceable. We stock the common Sterling hinge sizes on the truck, so replacement is usually done the same visit. Call (754) 354-3720 and describe the hinge code stamped on your current part.
Replacing hinges, drawer slides, or shelf boards takes one to two hours for a standard Fort Lauderdale kitchen with twenty to thirty cabinets and drawers. A sink basin or countertop replacement takes one full day, and a full Sterling kitchen remodel takes two to six weeks depending on scope and stone fabrication lead times. Every job gets a written schedule before we start.
We stock the most commonly failed Sterling parts on our trucks, including hinges, drawer slides, dampers, and shelf pins, so most hinge and slide replacements happen the same visit. Less common items like sink basins or specific cabinet box panels are ordered from our Fort Lauderdale suppliers and typically arrive within five to seven business days. We also install components and work with cabinetry from KraftMaid, Cambria, and Silestone when your kitchen mixes brands.
If your Sterling kitchen is showing its age in Fort Lauderdale, call (754) 354-3720 for a free estimate. Written price first, verified crew at your door, and a full year of coverage after the work is done.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
