Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
Silestone kitchen remodeling in Fort Lauderdale typically runs $14,000 to $45,000 installed, depending on countertop square footage, cabinet scope, and whether we’re replacing a single failed surface or gutting the whole kitchen. Most Silestone owners call us after a chip, crack, or seam separation on an existing countertop, or because a sink cutout has started showing stress fractures around the rim. We stock Silestone-compatible fabrication materials and can usually template and install replacement surfaces within two to three weeks in Fort Lauderdale, not months.
Here’s what we see most often: a homeowner drops a cast iron pan on the edge of a Silestone island overhang and takes out a chunk the size of a quarter. Or the seam between two slabs has yellowed and separated because the original installer used the wrong adhesive for Florida humidity. Or a sink undermount has pulled away from the quartz because the clips corroded. These are all fixable, and we’ll tell you exactly what it costs before we touch anything.
Which Silestone Models This Applies To
Silestone is Cosentino’s quartz line, and the model names matter for matching. We work with the full current catalog: Eternal Series (like Eternal Calacatta Gold and Eternal Noir), Loft Series, Sunlit Days, Urban Crush, and the older Classic and Mythology lines that still turn up in Fort Lauderdale condos built in the 2000s and 2010s. Each Silestone slab carries a serial number and lot code, usually printed on the back side and sometimes on a small sticker under the front overhang. That lot code matters because quartz colors shift slightly between production runs. If we’re replacing one section of countertop, we need the exact color and lot to get a match you’ll accept.
One compatibility gotcha in Fort Lauderdale: older Silestone from before roughly 2015 used a different resin binder than current production, which means a patch job with today’s adhesives may cure to a slightly different sheen. We test on an inconspicuous spot first. On the OEM-versus-aftermarket question: there’s no meaningful “OEM Silestone patch kit” for a cracked slab. Quartz is not repaired with a factory part; it’s addressed by a fabricator who knows how to cut, seam, and polish the material. What you’re really buying is the skill of the person doing the template and install, not a branded component. Aftermarket adhesives and epoxies from companies like Integra and Tenax are what every pro fabricator uses, and we keep a range of them on the truck.
Styles & brands we work with
Signs Your Silestone Kitchen Remodeling Is Failing
- Chipped edges on overhangs and corners. Silestone is tough but brittle at exposed edges. A chip at the corner of an island or peninsula means the edge profile has taken an impact hit, and in Fort Lauderdale kitchens with bar seating, it usually comes from a stool or a dropped dish. Left alone, a chip can spider into a larger crack.
- Separating or discolored seams. Florida humidity works on adhesive joints constantly. If your seam line has gone from invisible to a visible dark or yellow line, the original bond is failing. This is especially common in Fort Lauderdale homes near the water, where salt air accelerates adhesive breakdown.
- Stress fractures around the sink cutout. The narrow strips of quartz in front of and behind an undermount sink are the weakest points on the whole counter. Cracks here often mean the sink clips were over-tightened or the cutout corners were too sharp when the slab was fabricated.
- Dull, cloudy patches that don’t polish back. Silestone has a polished surface that resists most staining, but acidic spills left overnight or harsh cleaners used for years can etch the resin binder. If a spot looks cloudy and feels rough, the finish is compromised.
- Countertop pulling away from the wall or cabinets. This points to substrate movement underneath the slab, often from settlement or moisture. In Fort Lauderdale’s older homes, we see this with original wood framing that’s absorbed decades of humidity.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, a full Silestone kitchen remodel runs $14,000 to $45,000. That range includes countertop replacement at roughly $2,000 to $6,500 for typical slab footage and edge profiles, cabinet installation at $4,000 to $13,000 if cabinets are being replaced, backsplash at $800 to $2,500, and island work at $3,000 to $10,000 when an island is part of the scope. A small kitchen remodel with new Silestone counters and refaced or replacement cabinets lands around $9,000 to $20,000.
What drives the spread: total square footage of Silestone, whether we’re doing a standard eased edge or a more labor-intensive profile like a waterfall edge, how many seams the layout requires, and whether the existing cabinets can support new stone or need reinforcement. Our written price covers materials, fabrication, installation, haul-away of the old surface, and all sealing. Every job gets a written price before work starts, and the workmanship is covered by our 365-Day Done Right Promise. If something isn’t right within a year of completion, we make it right at no cost.
DIY or Call Us?
Here’s the honest split. You can safely chip-test your Silestone yourself: run a fingernail across any dull spot to see if it’s residue or actual etching. You can also check whether your seam is failing by wetting your finger and pressing along the joint to see if the line darkens with moisture. What you should not do is try to repair a crack with a store-bought quartz repair kit and expect it to hold. Quartz repair requires color-matched epoxy, precise surface prep, and polishing compounds that heat up during use. We’ve followed behind enough DIY patch jobs in Fort Lauderdale to know that a bad repair often makes the original damage worse by sealing dirt into the crack.
If you have a chip, a seam separation, or a sink that’s pulling loose, call us at (754) 354-3720. We’ll tell you what we found, what it takes to fix it, and what it will cost before we touch a thing.
FAQs
A properly fabricated and installed Silestone countertop lasts 25 to 30 years or more in Fort Lauderdale, though seams and sink bonds often need attention around the 10-to-15-year mark because of constant humidity and salt air. We see quartz surfaces outlast their cabinets in most kitchens. Call (754) 354-3720 if your surface is showing its age and you want an honest assessment on whether to repair or replace.
Small chips and shallow cracks can often be repaired with color-matched epoxy and re-polishing, but a full-depth crack through the slab usually means replacing that section. The repair-versus-replace call depends on crack location, depth, and whether it’s near a sink or cooktop cutout. Call (754) 354-3720 for a free estimate and we’ll give you a straight answer on whether a repair will hold.
A typical Silestone countertop replacement takes two to three weeks from template to install in Fort Lauderdale, with the install itself usually done in one day. Templating, slab selection, fabrication, and install scheduling each take a few days. Call (754) 354-3720 to get on the schedule and lock in a written price.
We source Silestone slabs directly through Cosentino’s Fort Lauderdale distribution channel and handle all ordering, templating, and fabrication in-house, so you never have to coordinate material delivery yourself. We also work with Cambria and Caesarstone surfaces, Kohler fixtures, and KraftMaid cabinetry if you want to coordinate the whole kitchen. Call (754) 354-3720 to discuss what you have and what you want.
Mason Remodeling Co Fort Lauderdale is an independent service provider and is not affiliated with Silestone or Cosentino.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
