Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Bathroom Remodeling: The Fort Lauderdale Owner’s Guide
A full Silestone bathroom remodel in Fort Lauderdale typically runs between $9,000 and $28,000 installed, depending on square footage, vanity configuration, and whether you’re replacing the shower pan or just the surround. We stock Silestone-compatible slabs, trim, and edge profiles, and in most cases we can template, fabricate, and install within two weeks of your measurements. Most homeowners don’t call us because they suddenly want a new bathroom – they call because a seam has opened up, a corner chipped, or water has gotten behind the vanity and swollen the cabinet base. The Silestone surface itself rarely fails; what fails is everything around it, and that’s usually where the real cost hides.
Mason Remodeling Co Fort Lauderdale is an independent contractor and not affiliated with Silestone or Cosentino. That said, we’ve installed enough of their product across South Florida to know exactly how it behaves in this climate, and what to check before you spend a dime.
Which Silestone Models This Applies To
Silestone doesn’t make “bathroom parts” in the traditional sense – it’s a quartz surface product, not a fixture line – so the “part” that fails is almost always one of three things: the fabricated slab section (vanity top, shower threshold, or tub deck), the edge profile, or the seam adhesive used during the original install. If you bought a home in Fort Lauderdale that was remodeled between roughly 2008 and 2018, there’s a good chance the bathroom has an older Silestone series like Blanco Zeus, Tigris Sand, or Stellar Snow. Those older formulations used a different resin binder than current Silestone Q10 or Sunlit Days lines, and they’re more prone to edge chipping when a hair dryer or curling iron drops on the corner.
The compatibility gotcha most people miss: Silestone comes in thicknesses of 1.2cm, 2cm, and 3cm. If you’re replacing just one vanity top and matching a 2cm slab to a 3cm remnant, the edge profile won’t line up cleanly at the seams, and no amount of adhesive fixes that. We measure and verify thickness before we quote, because a “close enough” replacement looks wrong every single time you walk into the bathroom. For the vanity base itself, we can match Silestone tops to KraftMaid or Wellborn cabinet lines we install regularly, and pair them with Kohler or Moen fixtures – one project, one crew, one written price.
Styles & brands we work with
Signs Your Silestone Bathroom Remodeling Is Failing
- Water staining at the seam where the backsplash meets the vanity. The original installer probably used a silicone bead that has since shrunk in Fort Lauderdale’s humidity cycles. Water gets behind it, saturates the cabinet box, and the base starts to swell. The Silestone itself is fine – the waterproofing isn’t.
- A hairline crack running from the faucet hole toward the front edge. Quartz doesn’t flex, so a crack like this means the cabinet underneath has settled or the original cutout was too tight for the faucet. In older Fort Lauderdale homes with wood-frame floors, slight settling is normal after ten or fifteen years – the crack is the symptom, not the disease.
- Chalky residue or dull spots that don’t polish out. Harsh cleaners containing bleach or high-alkaline degreasers break down the resin in older Silestone tops, leaving micro-pitting that collects soap scum. This is more common in guest bathrooms where housekeepers use whatever’s under the sink.
- Dark discoloration along the grout line where the Silestone shower threshold meets the tile. That’s trapped moisture behind improperly sealed grout. Left alone in Fort Lauderdale’s wet season, it feeds mold you can’t see, and eventually the threshold itself de-bonds from the mortar bed.
- The vanity top overhangs the cabinet by more than an inch and a half on one side. Somebody fabricated the top slightly off, or the cabinet wasn’t shimmed level before the slab went down. It looks like a cosmetic issue until someone leans on that overhang and the slab torques against the faucet connections below.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a standard 60-inch double-sink vanity with new Silestone top, undermount sinks, and fixture installation, Fort Lauderdale homeowners should budget $9,000 to $28,000 for the full bathroom remodel. A smaller guest bath with a 36-inch single-sink vanity and Silestone top runs closer to $5,000 to $12,000. If the project includes a walk-in shower with Silestone threshold and matching curb, add $4,500 to $12,000 depending on tile choice and waterproofing scope.
| Scope of Work | Typical Fort Lauderdale Installed Range |
|---|---|
| Silestone vanity top replacement only (36″ single sink) | $800 – $3,000 |
| Full small bathroom remodel with Silestone vanity | $5,000 – $12,000 |
| Primary bath remodel with Silestone vanity, shower threshold, tub deck | $9,000 – $28,000 |
| Walk-in shower with Silestone threshold (added to bath project) | $4,500 – $12,000 |
Every quote from Mason Remodeling Co Fort Lauderdale is a written, line-item price delivered before we start. You’ll see the slab cost, fabrication, plumbing disconnect/reconnect, haul-away, and warranty terms separately. Nothing gets added mid-job unless you change the scope, and if you do, you’ll approve the new number in writing first. That’s the Threshold Standard, and it’s not optional.
DIY or Call Us?
There are exactly two things a homeowner can safely do before calling a contractor: photograph the damage in daylight, and check whether the cabinet underneath is level with a four-foot bubble level. That’s it. Silestone slab work is not a DIY project – quartz is 90-93% stone by weight, a 36-inch vanity top runs 80 to 120 pounds depending on thickness, and a wrong move during removal will crack the slab or, worse, take a chunk out of the cabinet face. We’ve also seen homeowners try to “polish” a chip with an orbital sander and turn a $300 edge repair into a full slab replacement.
If water damage has reached the cabinet box, don’t wait. Mold inside a vanity in Fort Lauderdale’s climate spreads fast. Call us at (754) 354-3720 and we’ll come out, take measurements, and tell you exactly what we found and what it costs to fix before you pay anything.
FAQs
A properly installed Silestone vanity or shower threshold in Fort Lauderdale should last 20 to 25 years or more with normal use. The weak points aren’t the quartz – they’re the seam adhesive, the waterproofing membrane behind it, and the cabinet base underneath, which is why our 365-Day Done Right Promise covers workmanship on the entire assembly, not just the slab. If something isn’t right within a year of completion, we make it right at no charge.
Yes, if the chip is smaller than a nickel and you still have the broken piece, a color-matched epoxy repair is possible and runs a few hundred dollars. If the chip is larger, on a high-traffic corner, or the resin match is too far off, replacement of that single slab section is the honest fix. Call (754) 354-3720 and we’ll give you a straight answer either way.
Most Fort Lauderdale bathroom remodels with Silestone surfaces take one to two weeks from demolition to final walkthrough. Templating and slab ordering happens before demo, so your surface is ready when the cabinet is set. Bigger jobs with custom shower pans or structural work can stretch to three weeks, and you’ll see that timeline in writing on your quote.
We source Silestone slabs through Cosentino’s South Florida distribution and have priority access to current and discontinued series, so yes – we can match your existing top or order the replacement you want without waiting on a third party. We also install Cambria and Caesarstone, and pair surfaces with KraftMaid cabinetry and Kohler fixtures when the project calls for it. Call (754) 354-3720 for a free estimate and we’ll confirm availability for your specific series.
Key Takeaways: A Silestone bathroom remodel in Fort Lauderdale runs $9,000 to $28,000 for a full primary bath, with smaller vanities starting around $800 for the top alone. The slab rarely fails on its own – water intrusion, failed seams, and settling cabinets are the usual culprits. We tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. Call (754) 354-3720 to schedule your free estimate.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
