Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Fort Lauderdale Owner’s Guide
Quikrete fence installation in Fort Lauderdale typically runs $3,500 – $9,000 installed, and most post-setting and panel jobs are completed in one to three days depending on linear footage and soil conditions. We stock fast-setting Quikrete mixes on our trucks for fence post work, which matters more than most folks realize in South Florida, where a wet hole can ruin a dry-mix pour if the installer doesn’t know the water table here. Most homeowners call us after a storm reveals a leaning post, or when a gate starts dragging because the post base has rotted or shifted. Isaac Pruett has pulled more than one fence post in Victoria Park that looked fine above ground and was nearly hollow at the concrete line, usually because the original hole was too shallow for Fort Lauderdale’s sandy, shifting soil.
Which Quikrete Models This Applies To
This page covers fence installation work that uses Quikrete concrete products: standard 50-lb and 80-lb Fast-Setting Concrete Mix, High-Strength Concrete Mix, and the Quikrete 50-lb Fast-Setting Self-Consolidating Concrete Mix. The compatibility “gotcha” most people miss: Fast-Setting Concrete is designed for posts set directly in the ground at a depth of at least one-third the post height, and it is not the right product for a post anchored to an existing slab. If you have a concrete footer already poured and need to anchor a bracket, that calls for Quikrete Anchoring Cement or an epoxy anchor, not a post mix. The other checkable spec: Quikrete Fast-Setting sets in 20 – 40 minutes, which in Fort Lauderdale’s heat can work against you if you’re mixing in direct sun, because the working window shortens quickly. Our crews batch smaller mixes and work in sequence rather than dumping a full bag at once when the thermometer climbs past 90, which is most of the year. Mason Remodeling Co Fort Lauderdale is an independent service provider and is not affiliated with Quikrete.
Styles & brands we work with
Signs Your Quikrete Fence Installation Is Failing
- Post lean of more than a few degrees: This usually means the concrete footing was poured too shallow or the hole was bell-shaped at the bottom, letting the post pivot in Fort Lauderdale’s loose sandy soil.
- Rot at the post base, especially on the north side of the fence: Even pressure-treated posts wick moisture at the concrete-to-wood junction. We see it constantly in shaded yards where drainage sits against the post after a hard afternoon rain.
- Crumbling or cracked concrete at ground level: Salt air near Fort Lauderdale’s coastal corridors accelerates spalling on concrete footings, especially if the mix was overwatered at install.
- Gate sag or dragging: The hinge post moves first, not the gate itself. If the latch doesn’t line up anymore, the footing has shifted or the post has started to rot below grade.
- Visible gap between post and concrete collar: Soil settlement around a post shrinks away from the concrete, which then lets water pool against it, which then softens the bond. It’s a loop that gets worse with every wet season.
Replacement Cost & What’s Included
For a typical Fort Lauderdale backyard fence using Quikrete post mix, a full replacement of posts, panels, and hardware falls between $3,500 and $9,000. If only a section needs work, say four to six posts reset and re-paneled, you’re usually looking at $1,200 to $2,800. The spread comes down to three things: fence height, total linear footage, and whether old footings have to be excavated. Haul-away of the old concrete and wood goes into the line-item price, not a surprise at the end. We give you a written price before any work starts, and every Quikrete fence installation is covered by our 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can absolutely check a few things yourself: wiggle each post, look for exposed aggregate on the concrete collar, and check whether the gate latch still meets cleanly. That tells us a lot on the phone. What goes wrong in the DIY version is usually the hole. A post hole in Fort Lauderdale needs to be at least 24 inches deep and should be wider at the bottom than the top, and if you hit the water table in low spots like parts of Sailboat Bend, a dry pour won’t cure correctly. You also don’t want to be lifting a 60-lb bag of concrete mix over your head in July heat if you’re not used to it. We tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. Call (754) 354-3720 and we’ll come take a look.
FAQs
A properly set Quikrete post footing in Fort Lauderdale should last 15 to 25 years, though the wood post itself may need attention sooner depending on drainage and sun exposure. The concrete collar usually outlasts the lumber if the hole was dug to depth and the mix was installed without overwatering.
If the post itself is solid and the lean comes from soil shift around the footing, we can sometimes stabilize it with additional concrete rather than dig it out. If there’s rot at the base or the concrete is cracked through, the post and footing need to come out and get reset. Call (754) 354-3720 for an exact answer on yours, estimates are free.
For a typical four-to-six-post fence section, plan for one full day including removing old footings, digging new holes, setting posts in Quikrete, and reattaching panels. Longer runs or fence styles with concrete runners can stretch to two or three days, which we lay out in the written estimate before work begins.
Yes, our Fort Lauderdale crews carry fast-setting Quikrete mixes, post anchors, and common fence hardware on the truck, so most jobs don’t require a return trip to the supply yard. If your fence needs a specialty panel or a gate kit, we’ll source it before the install date and confirm the part number with you. We also work with specification-grade brands like KraftMaid, Cambria, and Silestone for broader remodel projects, which means access to vetted product lines in one place.
Get a Written Price Before Any Work Starts
Every Mason Remodeling Co Fort Lauderdale project, including Quikrete fence installation, comes with a written line-item price delivered before a single tool is unpacked. You’ll know exactly who is coming to your door, the technician’s name and photo before the visit, and a photo ID badge on arrival. That’s the Threshold Standard, and it’s how we’ve operated since 2004. Call (754) 354-3720 to schedule your free estimate for Quikrete fence installation in Fort Lauderdale, and a live person answers, every time, any hour.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
