Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If you own a home in Fort Lauderdale with an Oldcastle product in the kitchen and something’s gone wrong, here’s the straight answer: a full Oldcastle-compatible kitchen remodel in this market typically runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and how much plumbing and electrical work is involved. We stock and install Oldcastle-compatible components, and we can usually have a crew out within a few days to assess what you’re working with. We’re an independent remodeler, not affiliated with Oldcastle, which means we tell you exactly what failed, what it costs to fix or replace, and what your options are – without a sales pitch attached.
Most people don’t wake up planning to remodel a kitchen. They notice a cabinet face delaminating from South Florida humidity, a countertop seam opening up near the sink, or drawer slides that grind every time you reach for a spatula. The discovery is almost always on a Tuesday morning when you’re already late for work. By the time someone calls us, they’ve usually lived with it for months, wondering if it’s a repair or a full replacement. That’s the conversation we’ll have with you straight.
Key Takeaways:
- Oldcastle kitchen remodels in Fort Lauderdale run $14,000 – $45,000 installed
- We’re independent – not an Oldcastle dealer – so we source what actually fits your layout
- Written price before any work starts, every time, no exceptions
- Every crew member arrives with a name, photo, uniform, and ID badge you’ll recognize before the door opens
How Much Does an Oldcastle Kitchen Remodel Cost in Fort Lauderdale?
In Fort Lauderdale, the installed price for a kitchen remodel using Oldcastle or Oldcastle-compatible components breaks down like this:
| Project Scope | Installed Price Range |
|---|---|
| Full kitchen remodel (cabinets, counters, backsplash, island) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation only | $4,000 – $13,000 |
| Countertop installation only | $2,000 – $6,500 |
| Backsplash installation only | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What pushes a job toward the top of that range? Structural changes. If you’re moving a sink, running new electrical for an island, or opening a wall, the labor hours climb fast. What keeps it lower? Keeping the footprint where it is, choosing mid-grade stone or quartz, and using cabinet lines that don’t require custom fabrication. The parts themselves – cabinet boxes, drawer hardware, countertop slabs – are only part of the bill. The rest is prep work, leveling, plumbing rough-ins, and the finish details nobody sees but everybody feels when they’re wrong.
We give every homeowner a line-item written price before a tool gets unpacked. That’s not an upgrade. It’s how every Mason Remodeling Co Fort Lauderdale project starts, and Isaac Pruett has run jobs that way since he was framing walls in his teens. Call (754) 354-3720 and we’ll walk your kitchen together – we tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing.
Styles & brands we work with
Which Oldcastle Models This Applies To
Oldcastle produces a range of kitchen-adjacent products – most commonly pre-cast concrete countertops, stone veneers, and certain cabinet-adjacent trim systems – but the brand name appears on different generations of product across different Florida homes. Here’s the compatibility reality we deal with on the ground in Fort Lauderdale:
- Pre-cast concrete tops and sills: These show up in kitchens as countertops, window sills, and sometimes bar tops. The older Oldcastle pours used a denser mix that takes a beating; newer ones are lighter but more porous. If you can find the stamp on the underside of a slab, that tells us the series and whether a replacement section can be matched or the whole run needs replacing.
- Stone veneer and backsplash panels: Oldcastle’s manufactured stone lines vary in thickness from 1 to 1.5 inches. That matters because a backsplash replacement has to match the existing profile or you’ll see the difference every time you make coffee.
- The OEM-vs-aftermarket question: Oldcastle no longer maintains a direct-to-homeowner parts channel for many older kitchen lines. That leaves two paths: source a genuine Oldcastle remainder if one exists, or use a spec-grade equivalent – which in most Fort Lauderdale kitchens is actually the better call. The aftermarket pieces from brands like Cambria and Silestone often outperform the originals in humidity, and they’re available this week, not in three months.
The gotcha most homeowners don’t know: Oldcastle’s older pre-cast tops were site-poured in some developments, not factory-made. If your home was built by a spec builder in the 1990s or 2000s, what you have may be an Oldcastle-licensed pour with no model number at all. That changes the repair strategy – we match by measurement and material, not by part number. If you’re also dealing with cabinetry, we regularly work with KraftMaid and Wellborn boxes, which means you won’t get caught waiting on a discontinued line.
Signs Your Oldcastle Kitchen Remodeling Is Failing
Here are the five symptoms we see most often in Fort Lauderdale kitchens with Oldcastle components, and what’s actually happening underneath each one:
- A hairline crack running from the sink basin outward. This is the classic stress fracture in pre-cast concrete. Water gets in, the crack widens, and the edge starts to spall. Underlying cause is usually sink weight plus years of thermal cycling from hot pans.
- Discoloration or “ghosting” where the counter meets the cooktop. That’s heat damage to a sealer that was never meant to handle direct pan contact. The concrete itself is fine; the surface treatment has failed.
- Backsplash panels pulling away from the drywall at the corners. South Florida humidity, especially during the rainy season, causes the adhesive behind manufactured stone to break down. You’ll notice one corner lifts when you wipe it – that’s the beginning of a full re-set.
- Drawers and cabinet faces that won’t stay aligned. Older Oldcastle-adjacent cabinet installs used particle-board boxes that swell in Fort Lauderdale’s humidity cycle. Once the box swells, the drawer slides bind and the faces drift.
- A seam that opens and closes with the seasons. Pre-cast tops move. If a seam shifts visibly between dry and wet months, the slab wasn’t properly pinned during install – or the substrate beneath it is settling.
If you’ve got any of these, the fix is almost never a quick patch. That’s not us upselling – it’s just what Oldcastle materials do in this climate. Call (754) 354-3720 and we’ll tell you honestly whether you’re looking at a repair or a replacement before you spend a dime.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Oldcastle-compatible kitchen remodel in Fort Lauderdale, plan on $14,000 to $45,000 installed. That includes demolition of the existing surfaces, cabinet installation, countertop fabrication and installation, backsplash, sink and faucet hookups, and haul-away. We give you a written line-item breakdown before any work starts, so you’ll see exactly where every dollar goes – no change orders hiding in the final invoice.
Here’s what drives that spread:
- Countertop material: Quartz and natural stone (Cambria, Silestone, Caesarstone) run $2,000 – $6,500 just for installation. Pre-cast concrete replacements land in a similar range.
- Cabinet complexity: Stock boxes from KraftMaid or Wellborn keep costs down; custom sizing and full-extension hardware add labor hours.
- Plumbing and electrical: If we’re moving a sink or adding island outlets, that’s a different permit and a different crew on-site.
Every completed Mason Remodeling Co Fort Lauderdale project is covered by our 365-Day Done Right Promise: if the work is not right within one year of completion, we make it right at no cost to you. That’s 365 days from the completion date, written plainly on your warranty document. We’ve been doing this in South Florida since 2004, and Isaac Pruett has been running Fort Lauderdale jobs long enough to know that a guarantee only matters if it’s specific.
Call (754) 354-3720 for a free estimate – and yes, a live person answers. Every hour, every day, including weekends and holidays.
DIY or Call Us?
There’s a safe version of “Do it yourself” and a version that costs you more than we’d ever charge. Here’s the honest split for Oldcastle components:
What you can safely check: Confirm where the crack or seam gap is, note whether it changes with temperature, and look for water staining underneath the sink cabinet. Photograph everything. That told us 80% of what we need to know before we even arrive.
Where DIY goes wrong: Oldcastle pre-cast tops are heavy – a single slab can weigh over 200 pounds. One misplaced pry bar and you’ve cracked the seam you were trying to repair, or worse, damaged a cabinet box underneath. Cutting and fitting manufactured stone or quartz without the right diamond tooling produces edges that look like they were chewed. Silicone work around sinks looks easy until water finds the gap. None of this is about gatekeeping – it’s about the fact that the materials fight back, and Fort Lauderdale humidity means any imperfect seal reveals itself within weeks.
If part of the job involves electrical – moving an outlet, rewiring an island – that’s not a DIY conversation at all. We pull permits, we pass inspections, and you don’t inherit a fire hazard from a YouTube tutorial. Call (754) 354-3720 and we’ll take a look at what you’ve got. The estimate costs you nothing.
FAQs
A properly installed kitchen remodel in Fort Lauderdale lasts 15 to 25 years on the cabinet side and 20+ years for stone or quartz tops, though pre-cast concrete from Oldcastle’s older lines often starts showing surface wear by year 10 in our humidity.
Sometimes, yes – small edge chips and surface scratches can be filled and resealed if the underlying concrete is sound. But a crack that runs through the slab or a seam that’s opened from substrate movement means replacement is the honest answer. Call (754) 354-3720 and we’ll tell you which one you have, without leaning on you to spend more than the job needs.
A full kitchen remodel typically takes 3 to 6 weeks in Fort Lauderdale, with countertop fabrication running about 2 weeks of that. Smaller swaps – a countertop only, or a backsplash re-set – can be done in 2 to 4 days once materials arrive.
We source everything for you. We maintain relationships with spec-grade suppliers across South Florida for the materials that actually hold up here – quartz from Cambria and Silestone, cabinetry from KraftMaid and Wellborn, and matching stone veneers – so you don’t spend your weekends chasing a discontinued part number.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
