Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Lauderdale Homeowners Choose Mr-Glass Construction
We’re Mason Remodeling Co Fort Lauderdale, and we provide independent Mr Glass in Fort Lauderdale shower door and enclosure service across Fort Lauderdale, from Victoria Park to Coral Ridge. As an independent Mr-Glass service provider, we’re not affiliated with or authorized by the manufacturer, but our crews have installed, serviced, and repaired Mr-Glass frameless sliders, semi-frameless pivots, and neo-angle units in Fort Lauderdale condos and single-family homes for years. What sets our Mr-Glass work apart is that we know how Fort Lauderdale’s hard water, humidity, and salt air attack these specific frames and glass types, and we’ve built our repair approach around that reality. Call (754) 354-3720 for a free estimate on any Mr-Glass service.
Why Trust Mason Remodeling Co Fort Lauderdale for Your Mr-Glass Construction?
Isaac Pruett, our owner, has spent nearly two decades doing remodeling work across South Florida, with a good stretch of that time running projects in Fort Lauderdale neighborhoods like Victoria Park. He’s seen what happens to shower enclosures that weren’t installed with the local climate in mind, and he’s trained our crews to spot the difference between a Mr Glass repair in Pompano Beach door that just needs new rollers and one that needs to come out entirely. We stock the Mr-Glass OEM parts that fail most often in Fort Lauderdale, which means we don’t make you wait on manufacturer service or pay freight for parts that should already be in a local van.
We tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. Every Mr-Glass job gets a written price up front, and every crew member who shows up at your door is background-checked, identity-verified, and arrives in a marked uniform with a photo ID badge. You’ll know the technician’s name and see their photo before they arrive. That’s the Threshold Standard, and it applies to every visit, no exceptions.
Key Takeaways
- We repair Mr-Glass shower doors and enclosures in Fort Lauderdale without requiring manufacturer service calls.
- Hard water and salt air accelerate specific Mr-Glass part failures, and we stock the common OEM replacements locally.
- We quote a written price before any work starts, and every job carries our 365-Day Done Right Promise.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Fort Lauderdale
Mr-Glass makes solid shower enclosures, but Fort Lauderdale’s climate punishes certain parts harder than most. Here’s what we see most often when we get called out for Mr-Glass repairs.
- Sagging Frameless Euro-Style Sliding Doors. The top-hung rollers on Mr-Glass frameless sliders wear flat faster here than they would in most markets. Hard-water grit gets into the track, acts like sandpaper on the roller wheels, and the door starts to sag. You’ll notice glass-to-glass binding at the top corner or a gap at the bottom that lets water out onto the floor. We replace the roller assemblies and realign the track so the door glides again.
- Leaking Framed Pivot Doors at the Bottom Sweep. The vinyl sweeps and bottom seals on Mr-Glass semi-frameless pivot doors crack after three to five years of daily use, and Fort Lauderdale’s humidity speeds that up. Once the sweep splits, water wicks under the door at the curb and puddles outside the shower. We replace the sweep with a matching profile and re-check the curb angle so the water routes back into the pan.
- Loose Neo-Angle Frame Corners. Framed Mr-Glass neo-angle doors use corner screws that work loose from repeated cleaning and the slight frame movement that comes with salt-air corrosion. When those corners loosen, you get water weeping at the bottom joints and a frame that feels wobbly. We retighten, replace stripped screws with the proper stainless hardware, and reseal the corner joints.
- Hard-Water Etching on Clear Glass. Mr-Glass clear glass shows mineral etching and soap scum faster than treated glass, especially in Fort Lauderdale where the municipal water runs hard. Once etching sets, no cleaner removes it. We often recommend replacing with Mr-Glass low-iron or Rain-X-treated glass to reduce future buildup, and we can do that without replacing the frame.
- Handle and Hinge Corrosion. Salt-laden air near the intracoastal and beachfront accelerates corrosion on metal Mr-Glass hardware. We replace corroded handles and hinges with OEM or marine-grade aftermarket parts that hold up better in coastal exposure, then check the surrounding frame for any hidden weakening.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We source Mr-Glass OEM rollers, seals, and handles when the enclosure is under ten years old and the glass is intact. OEM parts match the original profile exactly, which matters on a frameless slider where a fraction of an inch changes how the door hangs. For older units where OEM is no longer available or the price doesn’t make sense, we use aftermarket parts with comparable roller diameter and seal profile. We don’t install parts that alter the door’s geometry.
We lean toward repair when the glass is clear of deep etching and the frame is square. We recommend full door replacement when the glass is etched beyond restoration, a frame corner is bent, or the track has been damaged to the point that new rollers will fail prematurely. We’ll show you the worn part and explain the numbers before you decide. Call (754) 354-3720 to schedule a free estimate.
Our Mr-Glass Service Process, Step by Step
- 1
Diagnosis. We inspect the track, rollers, seals, frame joints, and curb, then identify the exact Mr-Glass part that’s failing and why. We test the door’s hang and swing so we’re not guessing about the cause.
- 2
Repair or Install. We use OEM parts where the unit’s age calls for it, and we install them with the track alignment and reveal set correctly for a frameless Mr-Glass door, usually a clean 1/8-inch gap.
- 3
Test. We run the door through full open-close cycles, check for binding, and run water at the seams and curb to confirm no leaks.
- 4
Warranty & Follow-Up. Every Mr-Glass repair carries our written guarantee, and if something fails within 365 days of completion, we return and make it right at no cost. No dispute process, no conditions.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Fort Lauderdale
We work on the full range of Mr-Glass Construction in Davie, FL shower enclosures: the Frameless Euro-Style Sliding Shower Door, the Semi-Frameless Pivot Shower Door, the Framed Neo-Angle Shower Door, and the Mr-Glass Custom Heavy Glass Enclosure. That includes frameless glass shower enclosures, walk-in shower installations, and tub-to-shower conversions using Mr-Glass doors. We keep common Mr-Glass rollers, bottom sweeps, corner screws, and handles in local stock so most repairs don’t wait on a shipment.
We Also Service These Brands
Beyond Mr-Glass, our Fort Lauderdale crews work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, which means a shower repair can often be paired with the surrounding bathroom remodel by a General Contractor without coordinating multiple companies. If your project involves more than the glass door, we handle it in one written quote.
FAQs – Mr-Glass Construction Service in Fort Lauderdale
No. We’re an independent Mr-Glass service provider, not an authorized or manufacturer-affiliated company. That means we’re free to recommend the repair that makes sense for your door, not the one the manufacturer prefers, and we source parts based on what’s best for your enclosure’s age and condition. We’re state-licensed and insured, and every job carries our own written guarantee.
Yes, when the enclosure is under ten years old and the glass is intact, we source Mr-Glass OEM rollers, seals, and handles to match the original profile exactly. For older enclosures where OEM is unavailable or cost-prohibitive, we use aftermarket parts with comparable roller diameter and seal profile, and we advise full door replacement only when the glass is etched beyond restoration or the frame is bent. Call (754) 354-3720 for a free estimate and we’ll walk you through the part options.
Most roller replacements, bottom sweep repairs, and corner reseals on Mr-Glass doors take one to two hours on site. Full enclosure replacements or custom glass orders can take one to two weeks depending on glass fabrication. We give you a written timeline with your written price before any work starts, so you know what to expect. Call (754) 354-3720 for an exact quote.
We service the Frameless Euro-Style Sliding Shower Door, the Semi-Frameless Pivot Shower Door, the Framed Neo-Angle Shower Door, and the Mr-Glass Custom Heavy Glass Enclosure. If you’re not sure which model you have, take a photo of the door and track from the inside, and we can usually identify it over the phone before the visit.
Using an independent service provider can affect a manufacturer warranty if the manufacturer requires authorized service for warranty claims. We can’t advise you on the terms of your specific Mr-Glass warranty, but we can tell you which parts fail and why, and we’ll quote the repair so you can compare it against any warranty claim you’re pursuing. We never pressure a homeowner to skip a valid warranty path.
Frameless glass shower enclosure installation runs $1,200 to $4,500. A walk-in shower installation with a Mr-Glass enclosure runs $4,500 to $12,000. A full bathroom remodel that includes a Mr-Glass door runs $9,000 to $28,000. Every quote is written, line-itemed, and delivered before we start, so the number you see is the number you pay. Call (754) 354-3720 for exact pricing on your specific project.
Pricing at a Glance
| Mr-Glass Service | Fort Lauderdale Price Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $1,200 – $4,500 |
| Walk-In Shower Installation (Mr-Glass enclosure) | $4,500 – $12,000 |
| Bathroom Remodel (incl. Mr-Glass door) | $9,000 – $28,000 |
Book Your Mr-Glass Service in Fort Lauderdale, FL
If your Mr-Glass shower door is sagging, leaking, or showing hard-water etching, call (754) 354-3720 for a free estimate. We’ll diagnose the problem, give you a written price, and schedule the work around your availability. A live person answers 24 hours a day, 7 days a week. No call trees, no voicemail loops.
Written by Isaac Pruett, Owner at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale since 2004.
