Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Fort Lauderdale Owner’s Guide
We stock and install Mr-Glass-compatible window and door parts across Fort Lauderdale, with most replacements running $450 – $2,800 installed depending on the part, and window replacement work starting at $4,500 for full-frame jobs. When a Mr-Glass window or door fails in this climate, it usually announces itself quietly first: a sash that drags, a latch that won’t seat, or condensation between panes in the morning. By the time you notice, the seal or hardware has typically been degrading for months in the salt air and humidity.
Which Mr-Glass Models This Applies To
Mr-Glass produced multiple window and door lines over the years, and the trick is that parts are not interchangeable across all of them. The two details that matter most are the glass thickness and the hardware backset. Older Mr-Glass sliders and single-hung units from the early 2000s typically use 5/8-inch insulated glass, while later production moved to 7/8-inch in the premium lines. Before you order anything, look at the small etching in the corner of the glass pane itself: there is usually a serial and a date code. We match parts to that stamp, not to the sticker on the frame, because stickers fade and frames get repainted.
For OEM Mr-Glass parts, availability in Fort Lauderdale is spotty these days, which is why we carry quality aftermarket equivalents for the most common failure points: roller assemblies, latch sets, balance springs, and window seals. The aftermarket options we install are built to the same dimensional specs, and we’ll tell you up front if we think the OEM part is worth chasing or if an equivalent will outlast it in Florida weather. Mason Remodeling Co Fort Lauderdale is an independent service provider; we are not affiliated with the manufacturer.
Styles & brands we work with
Signs Your Mr-Glass Windows & Doors Is Failing
- Condensation or fog between the panes. The insulated glass seal has failed. In Fort Lauderdale’s humidity, a failed seal means permanent haze, and it won’t dry out on its own.
- The sash drags, sticks, or won’t stay open. Balance springs lose tension over time, especially in coastal air that accelerates metal fatigue. This is the most common Mr-Glass repair we do in older single-hung units.
- The door latch won’t catch or the handle spins. Internal cam assemblies wear flat, particularly on sliding patio doors that get heavy daily use. When a latch fails on an exterior door, treat it as a security issue, not just a nuisance.
- You can feel air moving around the frame on a windy day. Weatherstripping has compressed or dry-rotted. South Florida sun breaks down vinyl and rubber gaskets faster than most people expect, usually within 4 to 7 years.
- Water stains or softness at the bottom corner of the frame. This points to a failed sill dam or missing weep-hole cap. Left alone, water intrusion from a failed sill will rot the rough opening behind the frame.
Replacement Cost & What’s Included
Part-level repairs on Mr-Glass windows and doors in Fort Lauderdale run $450 – $2,800 installed. Glass replacement on a single sash runs $350 – $900, a full-frame window replacement in Fort Lauderdale starts around $4,500 and can reach $15,000 for a whole-home job, and impact-rated units go higher still. What drives the range: whether the frame is salvageable or has rotted behind the opening, whether you need tempered or impact glass, and whether the hardware is a standard backset or an older Mr-Glass oddball that requires custom machining.
Our price includes the part, labor, haul-away of the failed component, and cleanup of the work area. You get a written price before any work starts, and the installation is covered for 365 days from the completion date. If something is not right within that year, we come back and make it right at no charge. No conditions, no dispute process.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some Mr-Glass fixes are genuinely simple: cleaning clogged weep holes, replacing a plastic glazing bead, or tightening a loose handle screw are all things a careful homeowner can do with basic tools. Where DIY goes wrong is with anything that holds tension or weight: balance springs, roller assemblies in a heavy slider, and especially anything involving removing the glass unit itself. The balance-spring systems in Mr-Glass windows are under load even when the sash is closed, and a sudden release can send a metal spring through the opening faster than you can react. Isaac Pruett has seen enough of those to know when a job needs a trained hand, and we’d rather tell you that honestly than watch you get hurt.
If you’re not sure which camp your problem falls into, call (754) 354-3720. We’ll walk through the symptom with you and tell you whether it’s a Saturday-morning fix or something we should handle by Thursday.
FAQs
In Fort Lauderdale’s salt air and UV exposure, Mr-Glass window systems typically last 15 to 20 years before frame or seal failure becomes realistic, though hardware like rollers, balances, and latches often needs attention at the 8 to 12 year mark. The glass itself can last indefinitely if seals hold and frames stay square.
No, a failed seal between panes cannot be repaired; the glass unit has to be replaced. The good news is that replacing just the glass unit, called an IGU, is typically less expensive than replacing the entire window or sash. We can order the exact thickness and tint match for your Mr-Glass unit in Fort Lauderdale, usually within 5 to 7 business days.
Most hardware replacements, like latches, rollers, or balance springs, are completed in under two hours once we have the part on site, and glass unit swaps typically take 60 to 90 minutes. If the frame has water damage behind the opening, the job becomes a larger replacement and we’ll give you an honest timeline before we start work.
Yes, our Fort Lauderdale service trucks keep the most common Mr-Glass replacement parts on board, including roller assemblies, latch sets, balance springs, and a range of weatherstripping profiles. For oddball sizes or older series hardware, we source the part within 3 to 7 business days and hand the itemized price to you before anything gets removed.
Get Your Mr-Glass Parts Quote in Fort Lauderdale
You know what’s failing and you want a straight price. That’s exactly how we work. We tell you what we found, what it takes to fix it, and what it will cost before we touch a thing. Call (754) 354-3720 for a free estimate on your Mr-Glass window or door repair. A live person answers the phone, day or night, and you’ll get a written price before any work begins. We also stock and install parts for KraftMaid, Cambria, and Silestone products.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
