Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
A full Moen kitchen remodeling project in Fort Lauderdale typically runs $14,000 to $45,000 installed, and most projects we take on are completed within 3 to 6 weeks depending on cabinet lead times and countertop fabrication. We stock Moen fixtures and replacement parts on our trucks, and we can usually match your existing model on the first visit. The most common way homeowners find us is when a Moen faucet cartridge starts dripping, a pull-down spray head loses pressure, or they’re ready to swap out builder-grade fixtures during a larger kitchen refresh. Whatever brought you here, you’ll get a straight answer on what it costs before anyone touches a tool.
Which Moen Models This Applies To
Moen builds kitchen faucets across several distinct lines, and compatibility is not universal. The big three we see in Fort Lauderdale homes are the Moen Arbor, Moen Align, and Moen Brantford collections, but we also regularly service the Eva, Sleek, and Nio lines. Each uses a different cartridge platform. Moen’s 1255 Duralast cartridge covers a wide swath of single-handle pull-down and pull-out faucets, but the 1225 cartridge is what you’ll find in older two-handle Moen kitchen faucets, and the 4000 series is common in the MotionSense touchless models. Here’s the gotcha most homeowners miss: Moen stamps the model number on a small tag attached to the cold water supply line, not on the faucet body. Once that paper tag wears off or gets cut during installation, identifying the exact model requires pulling the cartridge and measuring it. We do this on site, during the estimate, at no charge.
On the OEM versus aftermarket question for Moen specifically: Moen’s own cartridges are well made and carry a lifetime warranty against leaks and drips when installed properly. Aftermarket 1255-compatible cartridges cost half as much, but in our experience they fail faster, particularly in Fort Lauderdale where hard water mineral buildup stresses the seals. We install genuine Moen parts unless a homeowner specifically asks us not to, and we’ll tell you the price difference in writing so you can decide with real numbers. The same applies to spray heads, hose assemblies, and mounting hardware.
Styles & brands we work with
Signs Your Moen Kitchen Remodeling Is Failing
- Dripping from the spout after you shut the water off. This is almost always a worn cartridge seal. The Moen 1255 cartridge uses ceramic discs that eventually score from sediment in Fort Lauderdale’s water supply, and once they score, water seeps past.
- Reduced flow or a sputtering spray head. Mineral deposits clog the aerator or the spray face. Sometimes it’s a simple cleaning; sometimes the check valve inside the spray head has failed and needs replacement.
- The handle gets stiff or won’t return to center. Hard water corrosion builds up around the cartridge stem and binds the mechanism. Left alone, the handle will eventually break at the pivot point.
- Water leaks from the base of the faucet when it runs. The o-rings that seal the faucet body to the sink deck have hardened and cracked. This is the slow leak that ruins the cabinet shelf below and warps the floor of the sink base before anyone notices.
- The pull-down hose won’t retract. The weight under the sink has slipped, the hose has kinked inside the cabinet, or the retraction spring inside the spout has failed. In Moen’s pull-down models, the hose routes through a nylon guide inside the spout that wears out over time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
When your Moen fixture needs work, the cost question comes first, so here are real numbers for Fort Lauderdale. A cartridge replacement runs $125 to $250 installed, including the part and the service call. Replacing a pull-down spray head and hose assembly is $95 to $185 installed. A complete faucet swap to a new Moen model runs $250 to $600 installed depending on the fixture you choose and the condition of the shutoff valves under your sink. If you’re folding Moen work into a larger kitchen remodel, the full project range in Fort Lauderdale is $14,000 to $45,000, with smaller kitchen remodels starting around $9,000 and full cabinet-and-countertop renovations landing in the mid-to-upper end of that range depending on cabinet line, countertop material, and structural work.
Every quote we write in Fort Lauderdale includes the parts, the labor, and the discard of the old fixture. No separate trip fees, no disposal surcharges. You get a written price before any work begins, and that price does not change unless we open the wall and find something we could not have seen from the outside, in which case we stop and tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. Every Moen repair or installation is covered by our 365-Day Done Right Promise, from the completion date, in writing.
DIY or Call Us?
A Moen cartridge swap is one of the few plumbing jobs we’ll tell an ambitious homeowner is reasonable to attempt. The risk is low: shut off the water at the angle stops under the sink, release pressure at the faucet, remove the handle, and use a cartridge puller if the old one is stuck. The places where DIY goes sideways are the angle stops that have not been shut in a decade and snap off when you turn them, the mounting nut that has corroded into place, and the supply lines that were never meant to flex again once disturbed. If any of those things happen, you’re now dealing with a live water line inside a cabinet with no shutoff. That’s not a bad afternoon, that’s a flooded kitchen.
If you want us to handle it, call (754) 354-3720 and we’ll schedule a time that works. We’ll send a background-checked, uniformed technician whose name and photo you’ll have before the visit, and they’ll show a photo ID badge at the door.
FAQs
A well-maintained Moen kitchen faucet lasts 10 to 15 years in Fort Lauderdale, but the cartridge typically needs replacing at the 5 to 8 year mark because of mineral wear from the local water. The faucet body and finish generally outlast the internal components. Call (754) 354-3720 if your faucet is acting up and you want an honest read on whether it’s a $150 repair or a full replacement.
In almost every case, yes. Moen designs their kitchen faucets around replaceable cartridges, spray heads, hoses, and o-rings, so the failure point is usually a $30 to $60 part, not the whole fixture. We’ll tell you when a repair makes sense and when you’d be throwing money at a faucet that’s already near the end of its life.
A straightforward Moen cartridge replacement takes 45 to 60 minutes once the tech is at the sink, including testing for leaks and cleaning up. Most repairs are done in a single visit, and we carry the common Moen cartridges, spray heads, and hoses on our trucks so there’s no second trip while a part ships.
We stock the Moen 1255 and 1225 cartridges, pull-down spray head assemblies, hoses, weights, and mounting hardware on our service trucks, and we source less common Moen parts through our local supplier network, typically within one to two business days. We also stock parts and work with fixtures from KraftMaid, Cambria, and Silestone when your project involves more than the faucet. You won’t need to hunt down parts yourself. Call (754) 354-3720 for an exact match and a written quote.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
