Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
A full Boxabl kitchen remodel in Fort Lauderdale typically runs $14,000 to $45,000 installed, depending on cabinet spec, countertop material, and whether we’re reconfiguring plumbing or electrical. We stock Boxabl-compatible cabinetry, countertop systems, and fixtures, and we can usually start within two weeks of your written estimate. Most Boxabl owners reach out when they’ve noticed cabinet faces delaminating from humidity, drawer slides binding, or countertop seams separating where the factory adhesive gave out in South Florida’s moisture load.
Here’s the thing about Boxabl kitchens – the shell is precision-built in a factory, but the interior finishes are assembled tight and fast. That means cabinet boxes are often screwed to wall panels with minimal clearance behind them, countertops are set on a compact substrate, and the backsplash is typically a thin laminate or peel-and-stick product. When something fails, you’re usually looking at repairs that don’t follow standard residential remodel playbooks. We’ve worked on enough of these to know where the surprises hide.
Mason Remodeling Co Fort Lauderdale is an independent service provider and is not affiliated with Boxabl. We tell you what we found, what it takes to fix it, and what it will cost – before we touch a thing.
Key Takeaways:
- Boxabl kitchen remodels in Fort Lauderdale run $14,000 to $45,000, with most projects landing between $18,000 and $28,000.
- Compatibility depends on your Boxabl’s production year and the specific cabinet-and-counter module installed at the factory.
- Every crew member is identity-verified and arrives in uniform with a photo ID badge at your door – you get their name and photo before the visit.
- Written price before any work starts, and every completed project carries our 365-Day Done Right Promise.
Which Boxabl Models This Applies To
We work on kitchen components across the Boxabl Casita line, including the standard 400-square-foot and 375-square-foot configurations. The kitchen module in these units is a compact L-shaped or galley layout, typically with a 24-inch range, a shallow-depth sink base, and upper cabinets mounted to a structural wall chase that carries the unit’s plumbing vent stack.
The compatibility gotcha most owners don’t know about: Boxabl changes supplier specs between production runs. Early Casitas used a European-style 32mm cabinet system with frameless boxes and clip-on hinge plates. Later units switched to a face-frame cabinet with concealed Euro hinges that mount differently. If you order replacement doors or drawer fronts without checking the hinge cup spacing, you’ll end up with expensive plywood that doesn’t hang right. We measure every opening, check the hinge bore pattern, and confirm the drawer slide length before we quote a single cabinet component.
For countertops, the factory laminate is glued to a substrate that’s thinner than what you’d find in a conventional home – usually 5/8-inch instead of 3/4-inch. That matters if you’re upgrading to quartz or solid surface. The new material weighs more than the factory laminate, so we need to verify the cabinet box can carry it. In most Casitas it can, but we’re not guessing. We inspect before we spec.
We stock OEM-equivalent cabinet hinges, drawer slides, and door bumpers that match the common Boxabl production runs. For cabinet boxes and doors, we order from specification-grade manufacturers including KraftMaid and Wellborn. For counters, we work with Cambria, Silestone, and Caesarstone. These aren’t big-box leftovers – they’re the same product lines we use on $45,000 custom remodels.
Styles & brands we work with
Signs Your Boxabl Kitchen Remodeling Is Failing
- Cabinet door edges swelling or peeling: Boxabl’s factory cabinet doors are often thermofoil or thin laminate over MDF. In Fort Lauderdale’s humidity, moisture wicks into the core through micro-scratches and the face layer starts lifting within three to five years. Once the core swells, the door won’t sit flush – replacement is usually cheaper than repair.
- Drawer slides grinding or catching: The factory slides are light-duty side-mount hardware. Coastal salt air and everyday sand grit accelerate wear. You’ll hear a grind, then the drawer starts racking sideways. Replacing the slides before the drawer box itself splits will save you a few hundred dollars.
- Countertop seam separating near the sink: This is the classic Boxabl failure point we see in Fort Lauderdale. The factory seam at the sink cutout sees constant water, dish soap, and heat cycling. Once the adhesive fails, water gets under the laminate and the substrate starts swelling. If you catch the seam early, we can often re-bond it. If the substrate is swelled, the counter is done.
- Cabinet boxes pulling away from the wall: Boxabl cabinets are mounted to the unit’s wall panels with screws that don’t always hit framing. Over time, the weight of dishes plus door slamming works the screws loose, and the whole box starts leaning forward. This isn’t cosmetic – a loaded upper cabinet pulling off the wall is a genuine hazard.
- Faucet or sink base leaking at the drain connection: The factory drain plumbing under a Boxabl sink is often a compact flex-line setup. With Florida’s hard water and the heat cycling under the sink, the gaskets dry out and start weeping. You’ll notice a musty smell or discoloration on the cabinet floor before you see standing water.
Replacement Cost & What’s Included
A Boxabl kitchen remodel in Fort Lauderdale runs $14,000 to $45,000 for a full refresh, with most owners landing in the $18,000 to $28,000 range. Here’s how that breaks down:
- Full kitchen remodel (Boxabl Casita): $14,000 – $45,000 – includes cabinet replacement, new countertops, backsplash, sink and faucet, hardware, and any plumbing or electrical adjustments needed to fit the new spec.
- Small kitchen remodel (partial refresh): $9,000 – $20,000 – typically cabinet doors and drawer fronts only, new countertop, backsplash, and fixture swap without moving plumbing or electrical.
- Cabinet installation (new boxes throughout): $4,000 – $13,000 – depends on whether we’re ordering custom sizes or cutting standard boxes to fit Boxabl’s compact dimensions.
- Countertop installation (quartz or solid surface upgrade): $2,000 – $6,500 – includes template, fabrication, delivery, install, and disposal of the factory laminate top.
- Backsplash installation: $800 – $2,500 – tile or glass panel depending on what you choose.
- Kitchen island installation: $3,000 – $10,000 – for Casita owners adding an island where the floor plan allows.
Every quote is a written, line-item price delivered before we order a single part. You’ll know what the cabinets cost, what the countertop costs, what labor costs, and what disposal costs. No verbal estimates that grow, no change orders that appear at the end. If the work isn’t right within 365 days of completion, we come back and make it right at no cost to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: open every cabinet and look at the hinge screws – if they’re pulling out, note it. Run your hand along the counter seam near the sink and feel for any lip or gap. Look under the sink with a flashlight for water staining. And check whether cabinet boxes are separating from the wall by pressing gently on the top edge of an upper door opening.
What you shouldn’t DIY: removing a countertop that’s bonded to the cabinet substrate, pulling cabinet boxes off wall panels (you’ll likely damage the panel behind them), and reworking any plumbing connection inside the wall chase. The wiring and water lines inside a Boxabl run through channels that are tighter than standard residential framing. One wrong cut and you’re into a repair that costs more than the original remodel. We’ve been called in after more than one ambitious weekend project went sideways in Victoria Park and surrounding Fort Lauderdale neighborhoods.
So the honest answer is, check it yourself, but call us before you start unscrewing anything structural. The estimate is free. The phone number is (754) 354-3720.
FAQs
Boxabl factory kitchen cabinets typically last five to eight years in South Florida’s heat and humidity before door edges start swelling, hinge screws strip, or drawer slides wear out, which is shorter than the 15 to 20 years you’d get from specification-grade cabinetry like KraftMaid or Wellborn. If you’re seeing swelling, peeling, or binding, call (754) 354-3720 and we’ll inspect what’s salvageable versus what should be replaced.
Yes, in many cases we can replace just the failing components – cabinet doors, drawer fronts, slides, hinges, a single countertop, or the sink base – which usually runs $2,000 to $6,500 depending on what’s failing and what we’re matching. We’ll give you a straight answer on whether a partial repair makes sense or whether the existing damage means a full replacement is the smarter money.
A partial Boxabl kitchen refresh (countertops, backsplash, cabinet doors) typically takes three to five working days, while a full remodel with cabinet box replacement and any plumbing or electrical work can run one to two weeks. We schedule a start date once your written estimate is approved and all materials are in our warehouse, so there’s no mid-project pause waiting on parts.
We stock OEM-equivalent cabinet hardware – hinges, drawer slides, door bumpers, shelf pins – that matches common Boxabl production runs, and we order cabinet boxes, doors, and countertops through our specification-grade supplier network so you’re not waiting on factory-direct lead times. Call (754) 354-3720 for an exact parts-and-labor quote – estimates are free.
Call Mason Remodeling Co Fort Lauderdale
If you own a Boxabl in Fort Lauderdale and the kitchen is showing signs of wear, failing hardware, water damage, or just needs a proper upgrade, call us at (754) 354-3720. You’ll speak to a live person, not a phone tree. We’ll schedule a time for Isaac Pruett or one of our senior technicians to walk your kitchen, take measurements, and deliver a written line-item price before any work starts. Every technician is background-checked and identity-verified under The Threshold Standard – you get their name and photo before the visit, and they show a photo ID badge at your door.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
