Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
Barrette kitchen remodeling in Fort Lauderdale typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and how much structural work your existing kitchen needs. If you’re staring at a cracked cabinet face, a drawer that won’t stay on its track, or a Barrette cabinet box that’s pulling away from the wall after years of Florida humidity, you’re not alone. We stock and install Barrette-compatible cabinetry hardware, hinges, drawer glides, and full cabinet replacements across Fort Lauderdale, and we can usually get your kitchen back to functional within one to two weeks once materials are confirmed.
Most homeowners discover a Barrette part has failed when a soft-close drawer suddenly slams, or when a hinge screw strips out and the door hangs crooked no matter how many times they tighten it. The humidity in Fort Lauderdale accelerates what would take a decade in drier climates. We see it every week in older homes throughout Victoria Park, Rio Vista, and Coral Ridge.
Key Takeaways
- Full Barrette kitchen remodel in Fort Lauderdale: $14,000 – $45,000 installed.
- Individual cabinet, hinge, or drawer-glide replacement: usually $150 – $900 per opening, installed.
- We’re an independent contractor in Fort Lauderdale, not affiliated with Barrette Outdoor Living.
- We show up with a written price before any work starts. Every time.
Which Barrette Models This Applies To
Before you call us, grab a flashlight and open the cabinet door. Barrette cabinetry is sold through multiple retail channels, and the hardware differs by series and year. Look for a small sticker inside the cabinet sink base or on the inside edge of a drawer box. It will show a model or SKU number that tells us which hinge pattern and drawer-glide length your cabinets use.
The compatibility gotcha with Barrette kitchen cabinets is overlay measurement. Some Barrette lines use a 1/2-inch overlay hinge, others use full-overlay concealed hinges with a 35mm cup bore. They are not interchangeable, and installing the wrong hinge will leave your door sitting proud of the frame or binding against the adjacent door. We’ve walked into kitchens where a previous handyman forced the wrong hinge on and the door never closed flush again. If the original sticker is gone, we measure the hinge cup diameter and the distance between mounting screws on the face frame before ordering anything.
For most Barrette cabinet failures, a quality aftermarket hinge or glide from brands like Blum or Salice works as well as the original, often better. We carry common Barrette replacement hardware on the truck, and for full cabinet box replacements, we match door style, finish, and frame width to what you already have so the repair doesn’t look patched.
Styles & brands we work with
Signs Your Barrette Kitchen Remodeling Is Failing
- Drawer won’t stay closed or slides out on its own. The glide’s locking mechanism or soft-close damper has worn out. In Fort Lauderdale humidity, the nylon wheels inside cheap glides swell and crack, which is why the drawer starts sticking before it fails completely.
- Hinge screw keeps stripping out of the cabinet face frame. This usually means the original screw was over-torqued at the factory or the face frame is MDF, not solid wood. MDF doesn’t hold threads well, and each tightening makes the hole bigger. We fix this with a threaded insert or by moving the hinge plate.
- Cabinet door sagging or rubbing against the cabinet below it. A sagging door on a Barrette cabinet almost always points to a worn-out hinge, not a warped door. Hinges have a finite open-close cycle count, and the ones installed by builders in Fort Lauderdale tracts are typically the cheapest available.
- Soft-close no longer soft. The damper piston inside the hinge has blown its seal. You’ll hear a loud snap when the door closes instead of the quiet pull-in you remember. It’s not repairable; the hinge gets replaced.
- Cabinet box pulling away from the wall or corner joint opening up. In older Fort Lauderdale homes – especially elevated slab construction – wall movement and humidity cycling loosen cabinet mounting screws. Left alone, the weight of dishes and countertop load can pull the box down. This one deserves a professional look before it cants.
Replacement Cost & What’s Included
When the problem is one or two failed hinges or a drawer glide, the repair is straightforward: parts run $8 to $40 per hinge and $20 to $60 per glide depending on brand and soft-close feature, and labor typically lands between $150 and $400 for a service call with multiple openings done at once. When the cabinet box itself is failing – swollen MDF edges, separated corner joints, water damage under the sink – that’s a cabinet replacement, not a hardware swap.
| Scope | Fort Lauderdale Installed Range |
|---|---|
| Hinge or glide replacement, 3 – 5 openings | $150 – $400 |
| Single cabinet box replacement (base or wall) | $500 – $1,400 |
| Cabinet installation (new, full run) | $4,000 – $13,000 |
| Full kitchen remodel | $14,000 – $45,000 |
Every Mason Remodeling Co Fort Lauderdale job comes with the same thing: a written line-item price before we order anything, and a written guarantee covering our workmanship for 365 days from the completion date. If a hinge we installed fails inside that year, we come back and fix it at no charge – no dispute process, no fine print dance. Isaac Pruett runs our Fort Lauderdale operation the same way he’s run projects for nearly two decades in South Florida: tell you what’s wrong, tell you what it costs, then do the work.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Cabinet hardware is one of the safer kitchen projects to attempt yourself, provided you buy the right hinge and you have a drill and patience. The mistakes we see are consistently the same: the homeowner orders a hinge based on a photo instead of a measurement, strips the face-frame screw hole by using a power drill on full speed, or doesn’t realize the soft-close damper is built into the hinge and not the door. If you’ve got a single hinge and you already know the overlay and cup size, go for it.
If the cabinet box is water-damaged, pulling from the wall, or you have more than two doors sagging, call us. Swapping a cabinet box while it’s still under granite or quartz gets tricky fast – one wrong move and you’re looking at a cracked countertop seam or a torn wall. We tell you what we found, what it takes to fix it, and what it will cost – before we touch a thing. Call (754) 354-3720 and we’ll send someone who can look at it and quote it on the spot.
FAQs
In Fort Lauderdale’s humidity, builder-grade Barrette hinges typically last 7 to 12 years before the soft-close damper fails or the screw holes strip out. Quality aftermarket hinges from Blum or Salice routinely go 15 to 20 years. Call (754) 354-3720 if yours are failing sooner than expected – we’ll tell you what’s actually wearing out.
No. The damper inside a soft-close hinge is a sealed piston; once it blows, the hinge is done. The good news is replacement hinges are inexpensive and we usually have the common Barrette patterns on hand for same-week installation in Fort Lauderdale. For an exact price, call (754) 354-3720 for a free estimate.
A single hinge swap takes about 20 minutes. A full kitchen of hinges and glides – 15 to 25 openings – takes our crew about a half day. We’ll give you a written total before we start so there are no surprise invoices at the end.
We stock common Barrette hinge patterns and drawer glides on our service trucks, and our Fort Lauderdale suppliers carry the less common sizes within a day or two. We also work with KraftMaid, Cambria, and Silestone lines when a full cabinet or countertop replacement is the better call. If you’re not sure what you have, send us a photo and we’ll identify it before we schedule the visit.
Contact Mason Remodeling Co Fort Lauderdale
If you’re dealing with a failed Barrette cabinet part in Fort Lauderdale, don’t wait for the next drawer to break mid-dinner. Call (754) 354-3720 and we’ll schedule a time to come out, diagnose what’s failing, and put a written price in your hand. Free estimates, no pressure, and a live person answers the phone whenever you call – including weekends.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
