Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Fort Lauderdale Owner’s Guide
ActiveYards fence installation in Fort Lauderdale typically costs between $3,500 and $9,000 installed, depending on the panel style, linear footage, and gate hardware involved. We stock ActiveYards-compatible posts, panels, gates, and hardware on our trucks, and most repairs or section replacements can be quoted and scheduled within the same week. Most owners discover their ActiveYards fence has failed after a storm: a gate that suddenly drags, a post that leans after heavy rain, or a panel that cracked at the rail connection.
Salt air, hurricane-season winds, and our sandy, shifting soil combine to stress fence systems in ways that inland Florida never sees. A fence that looked fine in March can be listing toward the neighbor’s yard by August. The good news: ActiveYards aluminum and vinyl systems are designed with stainless steel hardware and reinforced rails, which means most failures we see in Fort Lauderdale are installation-related, not product defects. A post that was never set deep enough in our sandy soil, or a gate hung without adequate blocking, can fail years before the panel itself gives out.
Which ActiveYards Models This Applies To
ActiveYards manufactures three primary residential lines in the U.S. market: the Grand Haven (vinyl privacy), the Manchester (vinyl picket), and the Coventry (aluminum). Within each line, panels come in standard widths of 6 feet, with height options ranging from 36 inches for decorative picket up to 72 inches for full-privacy panels. The gotcha for Fort Lauderdale homeowners: older ActiveYards installations from the mid-2010s may use a narrower 1.5-inch rail profile that was discontinued around 2018. If your fence is showing its age, we may need to verify rail dimensions before matching a replacement panel.
To identify what you have, look at the inside of any post cap. ActiveYards stamps the series name and manufacturing code on the post wall or cap underside. If the cap is missing or faded, measure the rail channel: Grand Haven uses a full 2-inch routed rail, while older stock used a 1.5-inch profile. These two are not interchangeable. For OEM replacement parts, we order directly through ActiveYards distribution, which keeps your warranty intact. For older or discontinued profiles, quality aftermarket U-channels and brackets from suppliers like LMT and Fence Armor typically match and often cost 15 to 25 percent less. We’ll tell you which route makes sense before we order anything.
We’re an independent service provider, not affiliated with ActiveYards directly. That matters because we can recommend the best fix without being tied to a single parts source.
Styles & brands we work with
Signs Your ActiveYards Fence Installation Is Failing
- Gates that drag or won’t latch. In Fort Lauderdale’s sandy soil, gate posts slowly settle and tilt, which throws off the gate’s swing arc. The underlying cause is nearly always a post that was set shallower than 30 inches or without a proper concrete collar.
- Panels rattling in the rails after wind. ActiveYards panels are secured with stainless steel clips inside the rail channel. Salt air eventually corrodes cheaper zinc clips, which lets the panel vibrate and eventually crack at its corners.
- Posts leaning at the base after rain. Florida rain saturates the top foot of soil fast. If a post was driven or set without drainage gravel at the base, water pools and the post loses bearing. This is the most common repair we walk into in Victoria Park and Rio Vista.
- White powdery residue on aluminum rails. That’s galvanic corrosion from dissimilar metal contact, usually where steel screws were substituted for ActiveYards’ spec stainless fasteners. Left alone, it eats through the rail within a couple of years.
- Brittle or yellowing vinyl panels. ActiveYards vinyl is UV-stabilized, but constant south-facing exposure near the coast can degrade cheaper aftermarket panels in under five years. OEM ActiveYards panels hold up longer because of a higher titanium dioxide content in the extrusion formula.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, a full ActiveYards fence installation runs $3,500 to $9,000 for a typical single-family lot. A smaller project, say replacing 30 to 40 linear feet with a basic 4-foot Manchester picket, lands near the lower end. A full perimeter with Grand Haven privacy panels, two gates, and removal of the old fence brings you to the upper range. Section repairs, such as replacing a cracked panel or one failed post, usually fall between $250 and $600.
Every quote we give is written and line-itemized before we start. You’ll see the exact panel or part cost, the labor, and the hardware, separately. We don’t bundle them into a single number you can’t verify. If the job turns out to be simpler than we thought, the price goes down; if it’s worse, we tell you before we proceed. Our 365-Day Done Right Promise covers the installation: if something fails within a year, we come back and fix it at no charge. Written price, written guarantee, every time.
DIY or Call Us?
For a loose gate latch or a missing post cap, most homeowners can handle that in an afternoon with a screwdriver. But anything involving a leaning post, cracked rail, or full panel replacement is not a casual weekend project in Fort Lauderdale. Digging out and resetting a post here means dealing with sand that collapses as you dig, hitting limestone ledge in some neighborhoods, and matching the concrete mix to our high water table. Get the depth wrong and you’ll have the same lean back in six months.
There’s one more practical issue: ActiveYards panels are engineered to fit their rails with tight tolerances. Force a panel from a big-box store into an ActiveYards rail and you’ll void any warranty and likely crack the panel corners within a year. If you’d rather not spend a weekend finding that out the hard way, call (754) 354-3720 and we’ll come take a look. Estimates are free.
FAQs
With proper post setting and stainless hardware, an ActiveYards aluminum fence lasts 20 to 25 years in our coastal climate, and vinyl runs 15 to 20 before UV degradation becomes visible. The posts, if set correctly, outlast the panels. Call (754) 354-3720 and we can inspect yours.
Most cracked panels must be replaced because the crack propagates through the extrusion and re-gluing vinyl never holds in Florida heat. For small dents or scuffs, we can sometimes source a matching panel section. Call (754) 354-3720 with your panel dimensions and we’ll tell you honestly.
A simple post reset or panel swap is done in a single visit, typically 2 to 4 hours. A full fence replacement on a standard Fort Lauderdale lot runs 1 to 2 days, including removal and haul-away of the old fence. We’ll give you a written timeline with the estimate.
We carry common ActiveYards replacement hardware, brackets, gates, and post caps on our trucks. For full panel or rail replacements, we order through ActiveYards distribution and typically have the parts within 5 to 7 business days. We’ll let you know before we order anything.
If your ActiveYards fence is showing its age, call (754) 354-3720. A real person answers, we’ll set up a time to look at it, and you’ll get a written price before any work starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
