Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Driveway & Pavers: The Fort Lauderdale Owner’s Guide
If you’re searching for Quikrete driveway and paver products in Fort Lauderdale, here’s what you need to know up front: we supply and install Quikrete-compatible driveway and paver systems with typical installed pricing ranging from $3,500 to $18,000 depending on whether you’re sealing, repairing, or tearing out and starting fresh. Quikrete is a concrete and masonry product line, not a machine with replaceable parts, so what usually brings homeowners to this page is a failing surface: cracked concrete, sunken pavers, crumbling edges, or sealant that’s given up against South Florida sun and salt air. The good news is most Quikrete driveway and paver failures are repairable without a full replacement if you catch them early enough.
We’ve been doing this work across Fort Lauderdale long enough to know which Quikrete products hold up here and which ones fight a losing battle against our climate. This page tells you what fails first, what it costs to fix, and whether you should grab a trowel or pick up the phone.
Key Takeaways
- Quikrete driveway and paver repairs in Fort Lauderdale typically run $250 – $18,000 depending on scope, from sealing to full replacement.
- Moisture intrusion and UV breakdown are the two biggest killers of Quikrete surfaces in South Florida.
- We carry Quikrete mixes, polymeric sand, sealers, and paver replacements on our trucks for most Fort Lauderdale jobs.
- Every job gets a written price before work starts, and our work is covered by the 365-Day Done Right Promise.
Which Quikrete Models This Applies To
Quikrete isn’t a single product line with model numbers like you’d find on a water heater. It’s a family of concrete and masonry materials, and identifying what you have matters because not everything is interchangeable. The most common Quikrete products we see on Fort Lauderdale driveways and patios fall into a few categories: Quikrete Concrete Mix (the standard 4,000 PSI bagged mix), Quikrete Crack-Resistant Concrete Mix (formulated with fibers to reduce shrinkage cracking), Quikrete Sand Mix (used for topping and repairs), Quikrete Vinyl Concrete Patcher (for spalled or chipped surfaces), and Quikrete polymeric sand for paver joints. There are also Quikrete paver products, though we more often see Belgard, Unilock, and Techo-Bloc pavers installed over a Quikrete base.
Here’s the compatibility gotcha most homeowners don’t know: if your driveway was poured with standard Quikrete Concrete Mix and you patch a crack with Vinyl Concrete Patcher, the repair will hold temporarily but the two materials cure at different rates. In Fort Lauderdale’s humidity, that mismatch shows up as a visible patch line within six months. We match the repair material to the original pour whenever possible. If you still have bags from the original job, check the product code printed on the bag. If not, we can usually identify the mix by color, aggregate size, and how it’s wearing.
One more thing worth knowing: Mason Remodeling Co Fort Lauderdale is an independent service provider. We’re not affiliated with Quikrete, which means we’re free to tell you when a different product would serve you better, and we do exactly that when the situation calls for it.
Styles & brands we work with
Signs Your Quikrete Driveway & Pavers Is Failing
- Cracks wider than a quarter inch. Hairline cracks are cosmetic, but once a crack reaches quarter-inch width, water gets in, and in Fort Lauderdale that water carries salt and expands with our heat cycles, making the crack grow every season.
- Efflorescence, that white powdery film. This happens when moisture moves through the concrete and deposits salts on the surface. It’s not structural damage, but it tells you water is traveling through your slab in ways it shouldn’t be.
- Sunken or tilted pavers. If individual pavers have dropped or shifted, your base material is failing underneath, usually because polymeric sand washed out or the compacted base was too thin to begin with. This will get worse with every heavy rain.
- Crumbling edges along the driveway lip. The edges carry the most load stress when cars turn in and out. Once the edge starts spalling, the damage accelerates because the exposed aggregate gives water more surface area to attack.
- Sealer that’s gone chalky or flaked off. In Fort Lauderdale’s UV index, most sealers last 3 to 5 years. If yours is peeling, the concrete underneath is now unprotected and will begin absorbing oil, salt, and moisture.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what we tell every Fort Lauderdale homeowner before we touch a single bag of Quikrete: the price you’re quoted is the price you pay. No change orders, no surprises after we open things up. We tell you what we found, what it takes to fix it, and what it will cost before we touch a thing.
- Driveway sealing: $250 – $700. Includes cleaning, minor crack filling, and application of a commercial-grade sealer rated for South Florida UV exposure.
- Crack repair and resurfacing: $800 – $2,500 depending on linear footage and depth of damage. We use Quikrete patching products matched to your original pour.
- Paver repair and re-leveling: $1,500 – $4,000. We pull affected pavers, recompact the base, replace damaged units, and re-apply polymeric sand.
- Full paver driveway installation: $7,000 – $18,000. Includes excavation, compacted base, pavers (Belgard, Unilock, or Techo-Bloc), edge restraints, and polymeric sand.
- Full concrete driveway replacement: $4,500 – $12,000. Demo, haul-away, proper base prep, forming, pouring, and finishing with Quikrete or a specification-grade poured mix.
Every job includes a written guarantee with clearly stated terms, good for 365 days from the completion date. If something isn’t right within that year, we come back and make it right at no charge.
DIY or Call Us?
Some Quikrete work is genuinely within reach of a motivated homeowner. Resealing a driveway is straightforward if you have a pressure washer, a roller, and a dry weekend, though Fort Lauderdale’s afternoon storms mean you need a 48-hour window with no rain. Filling a small crack with Quikrete Vinyl Concrete Patcher is also reasonable DIY territory, provided the crack is under a quarter inch wide and you follow the mixing ratios exactly.
Here’s where it goes wrong: anything involving pavers, base compaction, or structural cracks. A paver job is only as good as what’s underneath it, and if the base isn’t compacted in lifts with the right material, you’ll be redoing the job in eighteen months. Concrete work is heavy, dirty, and unforgiving of mistakes, and once Quikrete sets, it doesn’t give you a second chance. If you’re unsure, call (754) 354-3720 and we’ll give you an honest read on whether it’s a weekend project or a professional job.
FAQs
A properly poured and sealed Quikrete driveway in Fort Lauderdale typically lasts 20 to 30 years, though the sealant itself will need reapplication every 3 to 5 years. Our salt air and intense UV break down sealers faster here than in most of the country, so staying on top of sealing is the single best thing you can do to extend the slab’s life.
Yes, most cracks under a half inch wide can be repaired with Quikrete patching products matched to your original pour, and the repair can last for years if done correctly. Cracks wider than half an inch, or cracks with vertical displacement where one side is higher than the other, usually indicate a base failure and may require section replacement. Call (754) 354-3720 for an assessment and we’ll tell you honestly which camp you’re in.
Most paver repair jobs, including sunken paver re-leveling and polymeric sand replacement, are completed in one day. Larger jobs like full paver driveway installations typically take 3 to 5 working days depending on access, drainage requirements, and weather.
We stock the Quikrete products we use most often on our trucks: Concrete Mix, Crack-Resistant Mix, Vinyl Concrete Patcher, Sand Mix, and polymeric sand. For larger pours we source materials in bulk from local Fort Lauderdale suppliers, and we also work with paver brands like Belgard, Unilock, and Techo-Bloc alongside our other specification-grade material partners like KraftMaid, Cambria, and Silestone.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
