Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Fence Installation: The Fort Lauderdale Owner’s Guide
Belgard fence installation in Fort Lauderdale typically runs $3,500 to $9,000 installed, depending on linear footage, gate hardware, and whether we’re replacing an existing fence or starting fresh. We stock Belgard-compatible post kits, concrete footings, gate frames, and hardware on our trucks, so most installations and part replacements are completed in a single visit. The most common call we get starts the same way: a homeowner notices a leaning post after a summer storm, or a gate that won’t close cleanly because the hinges have sagged under salt air and humidity.
Fort Lauderdale’s climate punishes fence parts faster than drier markets. The combination of sandy soil, hurricane-season wind loads, and constant salt exposure means posts shift, concrete footings crack, and powder-coated hardware wears through sooner than the manufacturer’s national averages suggest. We see it every week in neighborhoods like Victoria Park and Rio Vista. Isaac Pruett puts it this way: “We tell you what we found, what it takes to fix it, and what it will cost – before we touch a thing.”
Which Belgard Models This Applies To
Belgard doesn’t manufacture traditional fence panels the way some big-box brands do. Their hardscape systems integrate fence and wall elements through post-and-panel systems built around their Weston, Melville, and Bordeaux wall blocks, often paired with aluminum or vinyl fence inserts. The part you need depends on which generation of the system you have. Older Belgard installations in Fort Lauderdale, particularly those done between 2008 and 2016, used a two-piece post cap that’s no longer in production. Newer systems use a single-piece cap with integrated drainage channels. If you’re holding a cracked cap with visible seams on the underside, you have the older style, and we can match it with a compatible aftermarket replacement or upgrade the caps across the whole line for a cleaner look.
Identifying the right part is straightforward once you know where to look. Belgard stamps most structural components with a mold number on the hidden face – the side that sits against the post. If the stamp has worn off (common after years of Florida sun and pressure washing), we measure the post cavity width and the panel channel depth on site. That takes about ten minutes. The OEM-versus-aftermarket decision matters for Belgard specifically because their color blends, particularly the Chestnut and Slate tones, are harder to match after the original line is discontinued. Quality aftermarket caps and post rings exist and cost 30-45% less than OEM, but the color match can drift slightly. We show you samples before we install anything, so there are no surprises.
Mason Remodeling Co Fort Lauderdale is an independent service provider. We’re not affiliated with Belgard and we don’t claim to be. What we do is stock and install their systems alongside compatible parts, the same way we handle KraftMaid cabinetry, Cambria, and Silestone surfaces. We know these products because we’ve worked with them for years, not because we carry a brand banner.
Styles & brands we work with
Signs Your Belgard Fence Installation Is Failing
- Post lean that worsens after rain. Sandy Fort Lauderdale soil drains fast until it doesn’t. When a post hole wasn’t packed with enough aggregate or the concrete footing was poured too shallow, heavy rain creates a void around the base. The post tilts, then keeps tilting with each storm cycle.
- Visible cracking at the post-to-panel joint. Belgard systems rely on a tight channel fit between post and panel. Thermal expansion in direct Florida sun causes micro-movement. Over three to five years, those hairline cracks open up enough to let water in, which accelerates the damage.
- Gate drag or a latch that won’t catch. Gate posts take more lateral load than any other post in the fence. When the hinge-side post shifts even half an inch, the gate drags on the paver or the latch misses the strike plate entirely. This is almost always a post problem, not a hinge problem.
- Powder coat bubbling or flaking on aluminum insert panels. Salt air is relentless in Fort Lauderdale, especially east of US-1. Once the powder coat is compromised, the aluminum underneath starts oxidizing. The panel still stands, but it looks rough and the warranty window has effectively closed.
- Concrete footings heaving or exposed above grade. You shouldn’t see the top of the concrete around your posts. If you can, erosion or poor installation is already at work. Exposed footings catch debris, hold moisture against the post base, and shorten the life of every component above them.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a standard Fort Lauderdale residential lot, plan on $3,500 to $9,000 for a complete Belgard fence installation or major replacement. A shorter run of 40 to 60 linear feet with a single pedestrian gate typically lands at the lower end. A full perimeter fence with double driveway gates, custom post spacing for hurricane wind load, and removal of an old failing fence pushes toward the upper range.
Every written price we provide breaks down line by line: materials, hardware, concrete, post digging and setting, panel installation, gate hanging and adjustment, and haul-away of old fencing. No verbal ballpark that grows on the final bill. No change order because we “found something” after we started digging. The price you sign is the price you pay, and it’s covered by our 365-Day Done Right Promise: if the work is not right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
There are things you can safely check yourself. Look at each post and see if you can spot the concrete footing. Check the gate by opening it halfway and letting go – it should stay put. If it swings either direction on its own, the post has shifted. Pull on each panel at the top and feel for movement. Those observations help us over the phone before we arrive.
What we don’t recommend is digging out a shifted post and resetting it yourself. Fort Lauderdale yards hide irrigation lines, landscape lighting conduits, and occasionally old electrical runs. Hitting one costs more than the post repair. And a fence that fails in a storm isn’t an eyesore – it’s a liability. A 40-pound panel catching wind becomes a projectile. If your fence is leaning, sagging, or cracking, call (754) 354-3720. We’ll send someone who knows exactly what they’re looking at, and you’ll have a written price before any work begins.
FAQs
A properly installed Belgard fence in Fort Lauderdale should last 15 to 25 years before major structural replacement, though gate hardware, post caps, and powder-coated inserts typically need attention at the 7- to 10-year mark due to salt air and sun exposure. The single biggest factor is the depth and quality of the post footings. Posts set to 30 inches or deeper with proper drainage aggregate outlast shallow-set posts by a decade or more in our coastal soil.
Yes, in most cases a leaning post can be lifted, re-set, and re-anchored without replacing the entire fence, and cracked caps or damaged gate hardware can be swapped individually. The exception is when multiple posts have shifted or the panel channels themselves have rotted, at which point sectional replacement is more economical than repeated spot fixes. Call (754) 354-3720 and we’ll tell you honestly which situation you’re in.
Most single-post resets and gate repairs are completed in one visit, typically four to six hours including concrete cure time for rapid-set mixes. A full fence installation on a standard Fort Lauderdale lot takes two to three working days, with the crew on site each morning and the site cleaned at the end of every day.
We keep common Belgard-compatible post caps, post rings, gate hinges, latches, and concrete anchoring supplies on the truck, which lets us handle most repairs same-visit. Uncommon older-generation parts or specific color-match inserts are ordered from our supplier and usually arrive within three to five business days. We confirm availability on the first call so you’re not waiting on a guess.
If your Belgard fence needs work in Fort Lauderdale, call (754) 354-3720. A live person answers, we schedule a visit, and you get a written price before anything gets touched.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
