Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
Jerith kitchen remodeling in Fort Lauderdale typically runs $14,000 to $45,000 installed, depending on whether you’re replacing isolated components or doing a full layout change. Most Jerith owners call us when a cabinet door has pulled loose from its hinge, a drawer slide has seized, or laminate facing has begun to peel at the edges after years of South Florida humidity. The faster path is a focused repair or component swap, not always a whole-kitchen gut, and we price it that way. If the part is installed with factory-fit hardware, we can often have it quoted and scheduled within days, not months.
We’re an independent Fort Lauderdale remodeling contractor, not affiliated with Jerith directly. What that means for you: we match Jerith hinge patterns, rail dimensions, and finish codes using the original hardware that shipped with your cabinets, sourced through our supply partners like KraftMaid, Cambria, and Silestone when a donor part or face-frame piece is needed.
Key Takeaways
- Jerith cabinet hardware failures in Fort Lauderdale are usually hinges, drawer slides, or corner gussets, not the cabinet boxes themselves.
- Replacement parts run $40 to $180 for hinges and slides; full door replacements with finish matching run $250 to $600 per door installed.
- Moisture is the real enemy here. Jerith boxes hold up well, but metal hardware near the dishwasher or sink takes on salt air and steam differently than in drier climates.
- We stock common Jerith-compatible soft-close hinges and full-extension slides on our trucks in Fort Lauderdale. Exotic finish-match doors are special order.
Which Jerith Models This Applies To
Jerith cabinets built after roughly 2005 use a standardized 35mm cup hinge bore, which means most current Jerith doors accept Blum, Grass, or Salice hardware without redrilling. Older Jerith lines from the late 1990s and early 2000s sometimes used a 26mm bore, and that’s the compatibility gotcha owners run into. If your hinge cup measures 26mm across, you’re not buying an off-the-shelf replacement at a big box store. We order those specific hinges and machine nothing on site unless the door frame allows it.
Drawer slides are the other variable. Jerith used undermount slides on their premium series and side-mount ball-bearing slides on base models. You identify yours by pulling the drawer fully out and looking at the bottom edges: if you see metal clipped to the drawer bottom, it’s undermount. Measuring the drawer box depth gives us the slide length, typically 18 or 21 inches. We keep both types stocked for same-day swap in Fort Lauderdale. For aftermarket options, we lean toward Blum or Accuride equivalents. They last longer in humid air than the economy slides Jerith shipped on entry lines, and they carry their own limited lifetime warranty.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Door won’t stay closed or slams shut. The soft-close damper inside the hinge has worn out. On Jerith doors, the damper is integrated into the hinge cup, so the whole hinge gets replaced, not just a piston. We see this most often on the cabinet closest to the dishwasher steam vent.
- Drawer slides with a grinding sound or a hop mid-pull. One or more ball bearings have flattened, or the slide has corroded from salt air working its way through the cabinet gap. Fort Lauderdale homes within a mile of the Intracoastal show this earlier than inland homes.
- Laminate peeling at the bottom edge of a sink base door. Water splashes and steam breaks down the adhesive bond over time. Jerith used thermally fused laminate on most doors, and once the edge lifts, it keeps lifting. The fix is a new door blank cut and edge-banded to match, not glue.
- Corner gusset cracked on a wall cabinet. That plastic or metal bracket in the top corner takes all the load when the box is overloaded with dishes. If the crack is fresh, we can install a metal corner brace and the cabinet stays square. If it’s been sagging for months, the face frame has twisted and the box gets rebuilt.
- Soft-close drawers that don’t soft-close anymore. The catch mechanism at the back of the slide is clogged with grease and dust, or a plastic clip snapped. It’s a small part, but it requires pulling the drawer and replacing the runner. Quick job, but a homeowner with a screwdriver can make it worse by prying on the nylon clip.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, Jerith hardware replacement usually lands between $150 and $800 when we’re talking hinges, slides, and small brackets. A single hinge swap is a one-hour visit: $75 service fee plus the hinge at $12 to $45 depending on the damper rating. A full drawer slide replacement on three drawers runs $300 to $500 installed. Door replacement with finish matching runs $250 to $600 per door, and a full face-frame refresh across a 10×10 kitchen falls in the $4,000 to $13,000 range, which includes new doors, drawer fronts, hinges, slides, and hardware.
Every quote includes the part, the labor, the disposal of the old part, and a written price before we start. No hourly surprises. If you’re pricing a larger Jerith kitchen remodel in Fort Lauderdale instead of a single part, the range is $14,000 to $45,000 depending on layout changes, countertop material, and whether we’re moving plumbing or electrical. Our 365-Day Done Right Promise covers parts and labor for a full year from completion. If something fails, we come back and fix it at no charge.
DIY or Call Us?
A homeowner can safely do two things here: identify the model and measure the part. Look for a Jerith label inside the sink base cabinet, usually a white sticker on the inside wall. Measure your hinge cup diameter, drawer depth, and door height. That information gets us the right part on the first trip. What a homeowner should not do is try to bend a sagging hinge back into alignment with pliers, or force a seized drawer slide with a pry bar. Both end with stripped screw holes or a cracked door stile, and the repair triples in cost.
There’s no high-tension danger in cabinet hardware like there is with garage door springs, so the risk here is damage to the cabinets, not to you. Still, a door that falls off its hinge can land on a foot or a child. If a Jerith door is hanging by one hinge, do not leave it. Call us at (754) 354-3720, describe what you’re seeing, and we’ll send a background-checked technician in a marked uniform, introduced by name and photo before they arrive, per our Threshold Standard. That’s our normal process, not an add-on.
FAQs
In Fort Lauderdale’s humidity and salt air, Jerith hinges typically last 10 to 15 years before the damper fails, and we see earlier failures within two miles of the ocean. Call (754) 354-3720 and we can tell you from the hinge cup size whether a simple swap fixes your door.
Hinges and slides are replaced, not repaired. The damper is sealed inside the hinge cup, and once a ball bearing flattens, the slide is done. Doors with peeling laminate can sometimes be re-edged if the delamination is under two inches. For an exact answer on your part, call (754) 354-3720.
A hinge or slide swap takes one to two hours on site once we have the right part. A door replacement with finish matching takes one to two weeks because the door blank gets edge-banded and color-matched off site. We’ll tell you the timeline before you commit. Call (754) 354-3720 to schedule.
Our Fort Lauderdale trucks carry common 35mm soft-close hinges, 18- and 21-inch undermount and side-mount slides, corner braces, and catch mechanisms. Uncommon Jerith parts are ordered the same week. If you can read us the label inside your sink base cabinet, we can usually tell you right then what we have. Call (754) 354-3720.
If you’ve got a Jerith cabinet door that won’t close, a drawer that fights you, or laminate peeling at the edges, call (754) 354-3720. We’ll quote the part and the labor in writing before any work starts, and you’ll know exactly who’s walking through your door.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
