Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Fence Installation: The Fort Lauderdale Owner’s Guide
Mr-Glass fence installation in Fort Lauderdale typically runs between $3,500 and $9,000 for a full post, frame, and panel job, depending on the fence length, gate hardware, and whether we’re pulling old footings or the existing concrete is sound enough to reuse. Most Mr-Glass fences we see in coastal neighborhoods fail at the connection points first, not the panels themselves: salt air works on the hardware for years before anyone notices, and then a good storm or a kid swinging on the gate finishes the job. The part that actually failed on your fence is usually not the glass at all. It’s the post base, the hinge, or the bottom channel where water has been sitting. We stock the common Mr-Glass-compatible hardware on the truck, and if your panel is cracked or shattered, we can measure and order the replacement while you’re still on the phone.
We tell you what we found, what it takes to fix it, and what it will cost – before we touch a thing.
Which Mr-Glass Models This Applies To
Mr-Glass has produced fence systems in several different panel widths and post configurations over the years, and the compatibility details matter more on a glass fence than on wood or vinyl. The glass panels themselves are tempered, engineered to a specific thickness, and cut to fit the channel spacing exactly. You can’t trim a glass panel on site. It fits or it doesn’t. That’s the first thing we check when we come out.
Most Fort Lauderdale homes we work on have either the side-mount post system, where the panels clamp into stainless spigots or channel brackets, or the bottom-channel system, where the glass sits in an aluminum track anchored to the deck or concrete curb. If your existing fence has square posts with visible bolt caps, it’s almost certainly the side-mount style. If it looks like the glass disappears into a metal tray at the bottom, that’s the channel system.
On the OEM-versus-aftermarket question: for Mr-Glass hardware like spigots, hinges, and channel caps, we generally recommend OEM parts where the original equipment is still available. The hole patterns line up, the finish matches, and you’re not drilling new holes into an already-drilled concrete curb. For replacement glass itself, a quality aftermarket tempered panel made to the same dimensions and thickness performs just as well and often costs 20 to 30 percent less. We’ll give you both numbers and let you decide. One compatibility gotcha worth knowing: older Mr-Glass systems from the mid-2000s sometimes used a 10mm panel thickness, while newer lines use 12mm. A 12mm panel will not seat properly in a 10mm channel, and no amount of shimming will fix it. Measure before you order.
Styles & brands we work with
Signs Your Mr-Glass Fence Installation Is Failing
- Rust staining at the base of the posts. This is the most common first sign in Fort Lauderdale, where salt air and pool water both work on the hardware. The stainless spigots are usually fine, but the anchor bolts or the channel screws often aren’t, and once the rust starts at the base plate, the post begins to lean and stress the panel above it.
- Panels that rattle in the wind or when the gate closes. A Mr-Glass panel should be firm in its channel or clamp. If it moves at all, the rubber gaskets have likely compressed or cracked, and now glass is riding directly against metal. That’s how stress fractures start.
- A gate that drags or won’t latch. The hinge pins wear first, especially on the heavier self-closing gates. Once a hinge sags even a few millimeters, the latch side drops and the panel loads unevenly across its length. Left alone, that uneven load eventually cracks the corner of the glass panel nearest the hinge.
- Water pooling inside the bottom channel after rain. Those channels have weep holes for a reason, and Florida rain plus debris means they clog. When water sits in the channel, the aluminum corrodes from the inside out and the gasket inside the channel turns to mush. You’ll see a greenish crust forming at the channel ends.
- Cracked or cloudy glass near the post line. Tempered glass is strong until it isn’t. A small chip at the edge, often hidden inside the channel, can turn into a full shatter pattern when the panel expands and contracts in the sun. If you see spiderweb cracks spreading from an edge, that panel is already done and needs to be replaced before it fails and leaves a sharp gap where a pool fence once was.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Mr-Glass fence installation and replacement work in Fort Lauderdale, the honest installed price range is $3,500 to $9,000. The gap between the low and high end comes down to a few things: how many linear feet of fence you have, how many panels need replacing, whether the existing footings and concrete curb are structurally sound, and whether you’re doing a like-for-like panel swap or a full system rebuild.
Here’s how that typically breaks down in our written quotes:
- Single tempered glass panel replacement (matched to your Mr-Glass dimensions): $350 to $900 installed, depending on size and thickness.
- Hinge, spigot, or channel hardware replacement per post: $150 to $400 including labor, when the post itself is still solid in its footing.
- Full Mr-Glass fence system replacement (rectangular yards, pool enclosures): $3,500 to $9,000 for the complete tear-out and reinstall, including new hardware, gaskets, and permits where required.
Every quote is a written, line-item price delivered before we start. No verbal ballpark that grows on the final bill. What’s included: demolition and haul-off of the old panel or hardware, inspection of the existing footings, new gaskets and wear items at every connection point we touch, and a written workmanship warranty that covers the installation for 365 days from the completion date. If something we installed fails within that year, we come back and fix it at no charge. That’s the deal, stated plainly.
DIY or Call Us?
You can safely inspect a Mr-Glass fence yourself. Look at the base of each post for rust, run your hand along the panel edges for chips, and check whether the gate hinges have any play when you lift the gate from the latch side. Knowing what’s wrong before you call means you’ll get a faster, more accurate quote from us, and you won’t be paying a crew to diagnose something you already found.
What you shouldn’t do is try to remove a tempered glass panel yourself. These panels are heavy, the edges are under compression, and a slip during removal will turn the panel into a few thousand pieces of razor-sharp gravel on your pool deck. Same goes for pulling posts out of the concrete: if the anchor bolts are seized or the footing is cracked, you need new core drilling, not a bigger wrench. We handle the removal, disposal, and reinstallation with the right tooling and a crew that’s background-checked and identity-verified before they ever get to your door. You’ll know who’s coming, with a name and photo sent to you before the visit. If you have a Mr-Glass panel that’s cracked, cloudy, or rattling loose, call us at (754) 354-3720 and we’ll get it measured and priced.
FAQs
A properly installed Mr-Glass fence in Fort Lauderdale typically lasts 15 to 20 years for the glass panels themselves, while the hardware, gaskets, and channels usually need attention at the 8 to 12 year mark in coastal salt-air conditions. The glass will outlive most of the metal around it. If you’re at year 10 and seeing rust or looseness at the posts, you’re right on schedule, not unlucky. Call (754) 354-3720 and we’ll inspect the whole run and tell you what still has life in it and what doesn’t.
No. Tempered glass cannot be repaired, glued, or ground down, and any crack in a tempered panel means the panel has already lost its structural integrity and will eventually shatter into small granular pieces. The only correct fix is a replacement panel cut to the exact dimensions and thickness of the original. Call (754) 354-3720 for a measurement and a written quote, no charge for the estimate.
Most single-panel replacements and hardware swaps take one morning on site, including tear-out, prep, and cleanup, as long as the existing footings and curb are in good shape. A full system replacement for a typical Fort Lauderdale pool fence runs 2 to 4 working days, depending on how many panels we’re fabricating and whether new core drilling is required. You’ll get a schedule in writing with your quote, before any work begins.
We stock the common Mr-Glass-compatible hardware, gaskets, hinges, and channel components on our service trucks in Fort Lauderdale, so we can usually fix loose or sagging connections the same visit. Replacement glass panels are tempered and fabricated to your exact dimensions, so those take a few days to produce. We handle the ordering and deliver the finished quote to you before anything is fabricated. Call (754) 354-3720 and we’ll tell you what’s on the truck and what has to be ordered.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
