Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Roofing: The Fort Lauderdale Owner’s Guide
ECO Window Systems roofing parts in Fort Lauderdale typically cost between $400 and $1,800 installed, depending on whether you need a seal replacement, flashing repair, or a full roofing component swap. We stock ECO Window Systems-compatible roofing hardware on our trucks and can usually match your part the same day we inspect it. Most owners discover the problem the hard way: a water stain on the ceiling after a heavy summer storm, or a window that suddenly won’t seal tight against the roofline.
If you’re reading this, you probably already know something’s wrong. Maybe the flashing around your ECO Window Systems skylight is pulling away from the roof deck. Maybe the curb mount has shifted and now every afternoon thunderstorm leaves a puddle on your windowsill. Whatever the symptom, the fix starts with knowing exactly which ECO Window Systems roofing component failed, and matching it correctly. That’s what this page is for.
Key Takeaways:
- ECO Window Systems roofing parts we replace most often: curb mounts, flashing kits, seal assemblies, and closure strips
- Installed pricing in Fort Lauderdale runs $400 – $1,800 for most roofing repairs tied to ECO Window Systems products
- We are an independent service provider, not affiliated with ECO Window Systems, and we match both OEM and quality aftermarket parts
- Every job gets a written price before work starts, and the workmanship carries our 365-Day Done Right Promise
Which ECO Window Systems Models This Applies To
ECO Window Systems builds several series of impact-rated windows and skylights, and the roofing connection point is where most failures happen in South Florida. The parts we match most often are the aluminum curb mount, the galvanized or powder-coated flashing kit, the EPDM rubber seal, and the interior closure strips that keep wind-driven rain out of the frame channel. If your unit has a label on the interior frame jamb, that’s the fastest way to identify it. Look for a series code and a size stamp, usually something like a four-digit width followed by a four-digit height in inches.
Here’s the compatibility gotcha most owners learn the hard way: ECO Window Systems changed its curb mount dimensions on several skylight lines around 2016. The older units used a 3-inch curb height, while newer production runs sit on a 4-inch curb. If you order a flashing kit for the wrong curb height, the seal won’t seat and the first real rain will find its way inside. We measure everything on site before we quote a part. On the OEM versus aftermarket question: for seals and closures, a quality aftermarket EPDM part often outperforms the original in Fort Lauderdale’s salt air and UV exposure, and costs 30 to 40 percent less. For flashing kits and structural curb mounts, we recommend staying with OEM-spec dimensions, whether the part is branded or matched to factory measurements.
Styles & brands we work with
Signs Your ECO Window Systems Roofing Is Failing
- Water staining at the ceiling corners after storms. This usually means the flashing has lifted or the curb seal has cracked, letting runoff migrate under the shingles and into the drywall. In Fort Lauderdale, the storm season from June through October exposes this within one or two heavy downpours.
- Condensation between the glass panes of a skylight. The roofing seal is not the only failure point, but when the curb mount flexes, it stresses the frame and breaks the glass seal. You’ll see fogging that never clears, which means the insulating gas has escaped.
- Visible daylight or a gap where the window meets the roofline. This is the one to treat as urgent. If you can see light, water is already getting in. The closure strip has shrunk or the flashing has pulled loose, and the fix is not caulk; it’s a proper reseat.
- Rust streaks or corrosion on the flashing itself. Fort Lauderdale’s salt air eats through thin galvanizing fast. Once the protective coating fails, pinholes form and the flashing becomes a sieve. Replacement is the only real fix.
- A damp or musty smell in one room after rain, with no visible leak. Water is tracking along the roof deck from a failed curb seal and soaking the insulation before it ever shows on the ceiling. By the time you smell it, the leak has been active for weeks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For ECO Window Systems roofing work in Fort Lauderdale, here’s what you can expect to pay, installed:
- Seal or closure strip replacement: $400 – $800
- Flashing kit replacement (single unit): $600 – $1,200
- Curb mount reseat or rebuild: $800 – $1,800
- Full roofing connection rework with new seal, flashing, and closures: $1,200 – $1,800
What drives the range? Roof pitch and access. A low-slope roof in Victoria Park is a faster, safer job than a steep-pitch roof in Rio Vista, and that difference shows up in labor time. Parts are itemized separately on your quote, so you see exactly what the hardware costs versus the installation. Every job comes with our written price before we start, and the workmanship is covered by our 365-Day Done Right Promise. If the repair fails within a year, we return and fix it at no charge. That’s the whole promise, stated plainly.
DIY or Call Us?
There are some things you can safely check yourself. Look for visible gaps at the roofline, rust on the flashing, or water stains forming in a pattern around the skylight well. You can clear debris from the curb mount and check that drainage channels aren’t clogged with leaves. That’s about where the safe part ends.
Working on a roof in Fort Lauderdale means working at height, usually on a surface that’s hot, sometimes slick with morning dew or afternoon rain. Flashing repair done wrong creates a bigger leak than the one you started with, and a fall off a roof is a life-changing injury. We’re not going to give you a step-by-step for pulling flashing or reseating a curb mount, because that’s exactly the kind of job where a good outcome depends on experience. If you’ve got a failing ECO Window Systems roofing component, call us at (754) 354-3720 and we’ll come measure it, identify it, and give you a written price before any work begins. We tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing.
FAQs
The original seals and flashing on ECO Window Systems roofing connections typically last 8 to 12 years in Fort Lauderdale’s salt air and UV exposure, with curb mounts lasting longer if they were installed correctly. You’ll usually replace seals and closures two to three times before the curb mount itself needs work. Call (754) 354-3720 and we’ll inspect yours and tell you what’s left in it.
You can sometimes reseal minor lifts with the right sealant and a proper re-roll, but once flashing shows rust pinholes or the EPDM has hardened and cracked, patching just delays the replacement. We’ll tell you honestly which situation you’re in and quote both the patch and the permanent fix so you can decide with real numbers. Call (754) 354-3720 for an exact quote, estimates are free.
Most ECO Window Systems roofing seal and flashing replacements are done in a single visit, usually three to five hours including setup, removal, reseat, and cleanup. Curb mount rebuilds can run a full day depending on roof access and condition. We’ll give you the timeline on the written estimate before we start, and it won’t change on the back end.
Our trucks carry common EPDM seal profiles, closure strips, and flashing sizes that match ECO Window Systems dimensions, so most repairs can be done the day we confirm the failure. If your unit needs a specific OEM-spec curb mount or a custom flashing profile, we order it and schedule the install as soon as it lands, usually within three to five business days in Fort Lauderdale.
We also stock parts and materials for KraftMaid cabinetry, Cambria surfaces, and Silestone countertops, so if your roofline repair is part of a bigger remodel, one crew can handle it.
If your ECO Window Systems roofing has failed or is showing early signs, don’t wait for the next storm to confirm it. Call Mason Remodeling Co Fort Lauderdale at (754) 354-3720 and we’ll come out, measure the part, and hand you a written price before any work starts. Free estimates, no pressure, and a live person answers every call, any hour, any day.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
