Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors: The Fort Lauderdale Owner’s Guide
We stock, match, and install PGT window and door parts across Fort Lauderdale, with most hinge, roller, lock, and seal replacements running $180 to $640 installed depending on the series and part. If your PGT window won’t lock, is hard to slide, or you’re feeling a draft, this page tells you what you’re dealing with and what it costs to fix. Most PGT parts fail one of three ways: the lock mechanism strips from salt air, the rollers grind down from sand and humidity, or the weatherstripping bakes brittle in the sun then lets water and air through.
We see this all over Fort Lauderdale. In neighborhoods like Victoria Park, Coral Ridge, and Rio Vista, PGT windows take a beating from coastal air that inland homes never deal with. The good news is PGT builds a straightforward, serviceable window, and the right part matched to the right series gets you back to smooth operation same visit in most cases.
Which PGT Models This Applies To
PGT makes several window and door lines, and the part you need depends entirely on which one you have. The main series we service in Fort Lauderdale are WinGuard (aluminum impact windows, common in homes built after 2002), SpectraGuard (vinyl impact), Eze-Breeze (lightweight sliding panels), and PGT sliding glass doors in both the 5500 and 7700 series. Each line uses different hardware geometry, so a roller from a WinGuard won’t fit a SpectraGuard, even if both windows look similar from across the room.
To identify what you have, look at the corner of the glass or the frame for a small etched label with the PGT logo and a series number. On sliding doors, the label is usually on the edge of the door panel near the lock. If the label’s worn off, measure the glass thickness and the frame profile, then call us; we’ll sort it from there. One compatibility gotcha we run into often: PGT changed roller designs on the WinGuard line around 2015, so two homes built three years apart can have visually identical doors with entirely different roller assemblies. Order the new-style roller for an old door and it won’t seat. We keep both revisions on hand to avoid that exact headache.
On the OEM-versus-aftermarket question: PGT’s OEM hardware is solid, but for hinge and roller failures we often recommend a quality aftermarket replacement that uses stainless steel internals, which hold up better to Fort Lauderdale’s salt air than the original plated components. For locks and laminated glass inserts, stick with OEM; those are engineered to work with PGT’s specific strike plates and channels.
Styles & brands we work with
Signs Your PGT Windows & Doors Is Failing
- Sliding door takes real effort to move. The rollers have flattened or corroded. In Fort Lauderdale, salt and sand work into the roller bearings and destroy them from the inside. You feel it as drag, then a grind, then the door won’t move without leaning into it.
- Window won’t lock or the handle spins loose. The lock pawl has stripped, or the internal cam broke. Salt air corrodes the zinc internals PGT uses in some lock sets, and once the pawl is gone the window won’t seal against the frame.
- Visible daylight or a draft around the sash edges. Weatherstripping has gone brittle. PGT weatherstripping in Fort Lauderdale typically lasts 5 to 8 years before UV exposure turns it hard and cracked. Once it cracks, it doesn’t compress, and you get air and water intrusion.
- Condensation or fog between the glass panes. The insulated glass unit’s seal has failed. This isn’t repairable; the IGU needs replacement. You see this more in windows that get direct afternoon sun, where seal temperatures cycle hard every day.
- Water stains on the interior sill after heavy rain. The weep holes are clogged, or the gasket at the bottom rail has failed. Proper drainage depends on clean weeps; once they clog with Fort Lauderdale’s fine sand and debris, water backs up and finds its way inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Lauderdale PGT repairs, here’s what we charge, installed:
| Repair | Installed Price Range |
|---|---|
| Sliding door roller replacement (both panels) | $220 – $480 |
| Window lock / handle replacement | $150 – $310 |
| Weatherstripping replacement (per window or door) | $120 – $280 |
| Hinge replacement on casement or awning window | $180 – $360 |
| Insulated glass unit replacement (impact-rated) | $450 – $1,200 |
Every price includes the part, the labor, and disposal of the old hardware. You get a written price before any work starts, and we don’t change it mid-job. The biggest driver of cost is glass replacement: PGT’s impact-rated IGUs are laminated, which costs more than standard dual-pane, but skipping that downgrades your window permanently. Every repair we do is covered for 365 days from completion, part and labor.
DIY or Call Us?
You can safely check a few things yourself: see if the track is clogged with debris, look for obvious weatherstripping cracks, and note whether the lock handle is loose. Cleaning the track and confirming the diagnosis is genuinely useful before you call, because it helps us bring the right part. What you should not do is pull a PGT sliding door panel off by yourself. A WinGuard panel can weigh 200 pounds or more, and without the right lift-out technique the panel drops and the glass shatters or someone gets hurt. Same warning applies to replacing springs or tension hardware on any fold-away or multi-point lock system: high-tension parts under load can release suddenly. We tell you what we found, what it takes to fix it, and what it will cost before we touch a thing. Call (754) 354-3720 and we’ll get the right part matched to your PGT series.
FAQs
Lock mechanisms and rollers typically last 7 to 12 years in Fort Lauderdale, while weatherstripping wears out in 5 to 8 years due to sun and salt exposure. A window that’s hard to operate at year 10 is normal wear, not a product defect. Call (754) 354-3720 for a free estimate if any part is acting up.
No. Rollers are sealed units, and once the internal bearing wears out or corrodes, the assembly has to be swapped for new. There’s no rebuilding a flattened roller, and attempting it just delays the proper fix. We stock rollers for both old and new PGT series.
Most lock, roller, and weatherstripping replacements take 45 minutes to 2 hours on site. A full glass replacement can take up to a week because the IGU has to be ordered to size and tempered laminated to match PGT’s impact spec.
Yes, we carry the most common PGT rollers, locks, handles, and weatherstripping for WinGuard, SpectraGuard, Eze-Breeze, and 5500/7700 series doors on our service vehicles. If we don’t have your exact part, we order it from our Fort Lauderdale supplier network, and installation is scheduled as soon as it arrives. We also stock compatible hardware for KraftMaid, Cambria, and Silestone products, since many home projects involve more than one system.
Ready to get your PGT window or door working right again? Call (754) 354-3720 for a free estimate. We’ll tell you what’s wrong, what it costs to fix, and exactly when we can do it, written down before anything starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
