Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Fort Lauderdale Owner’s Guide
Boral fence installation in Fort Lauderdale typically runs $3,500 to $9,000 for a complete new fence, depending on the linear footage, height, and whether we’re replacing rotted posts or starting from bare ground. A straightforward section replacement or gate rebuild lands on the lower end, while full-perimeter runs with gate hardware and demo of the old fence climb toward the top. Most Fort Lauderdale homeowners discover their Boral fence section has failed by noticing sagging panels after a storm, a gate that won’t latch, or visible cracking where the post meets the concrete footing. You’ll usually see it before you hear it: a lean that wasn’t there last hurricane season.
Which Boral Models This Applies To
Boral fencing comes in two construction styles that matter for parts matching: solid post-and-rail sections and the more common framed panel system. The Boral DuraPanel line (previously sold as Select and Estate styles) uses a foam-core composite with a dense outer skin, and it’s cut differently than standard vinyl. That skin is why a generic vinyl post sleeve never seats quite right: the wall thickness runs about 3-1/2 inches on Boral panels versus closer to 4 inches on box-store vinyl, so you need Boral-specific top rails, bottom rails, and post caps. The one compatibility fact that saves people money: Boral post caps and rail brackets are not interchangeable with Veranda, U.S. Fence, or other vinyl post sleeves sold at home centers in South Florida. If the cap snaps on loose or rocks, the previous installer grabbed whatever was on the truck.
We’re an independent service provider, not affiliated with Boral, but we install and match Boral-compatible materials every week across Fort Lauderdale. When we can’t source an exact discontinued color (Boral has shuffled its palette over the years; the old “Chestnut” doesn’t match the current “Walnut” exactly), we carry a quality aftermarket match in the same profile and warranty the fit. We’ll tell you upfront if a true OEM piece is back-ordered and what the aftermarket equivalent means for your fence’s look and lifespan.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Post lean after heavy rain or wind. In Fort Lauderdale’s sandy-loam soil, the concrete footing torques loose over time, especially on corner posts. The fence starts talking to you when the gate drags on the latch side.
- Cracking at the post base. Boral panels are tough, but the bottom rail takes salt air and sprinkler splash. Once the skin cracks, water works its way into the foam core and swells the section.
- Panel sag between posts. Sag usually means the bottom rail is cracked or the rail clip pulled out. Temporary fix feels solid for a week, then the next storm re-opens it.
- Gate latch won’t line up. Posts shifting outward pulls the hinges and latch out of plane. Owners often replace the latch twice before realizing the post is the problem.
- Chalky, faded surface that’s gone rough. Boral holds color longer than standard vinyl, but a decade of Florida sun will dull the cap rails first. Pretty soon the top rail looks like a different fence than the pickets.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Boral fence installation in Fort Lauderdale runs $3,500 to $9,000 as the honest range. At the low end, you’re getting roughly 80 to 100 linear feet of 4-foot Boral-compatible panel with new posts, caps, and basic hardware, no demo of a steel fence or tree work. At the high end, you’re looking at 180 to 220 linear feet of 6-foot privacy fence, a double gate, concrete demo and haul-off, and fixes to any existing post footings we can reuse. The line item that changes your number the most is what’s underground: if we hit buried sprinkler lines or old builders’ debris below the lot line, that’s where labor goes up.
Every quote is written before we start. That’s the way Isaac Pruett has run projects since his days working Victoria Park and Sailboat Bend: a line-item price with parts, labor, haul-away, and any concrete or gate hardware separate, so you see exactly where each dollar goes. No verbal estimate that inflates on the final bill. The line-item quote is our standard on every fence job in Fort Lauderdale. The completed installation is covered for 365 days from the completion date under our Done Right Promise: if something fails and it’s our work, we come back and fix it at no charge.
DIY or Call Us?
You can safely check what failed without risking much: see if a post moves when you bump it, look for cracks at the bottom rail, and run a hand along the cap to find splits. What you don’t want to do is dig out a concrete footing by hand in Fort Lauderdale summer and then re-set a six-foot post alone. A fence post that tips while you’re guiding it into wet concrete weighs enough to break a hand or a neighbor’s windshield. Same goes for running a demo saw through the old footing. Most DIY Boral repairs we see started because someone watched a video, bought a universal vinyl post sleeve, and then called us when the panel still sagged and the new sleeve cracked in under eight months.
This is a job we’re set up for: we carry Boral-compatible rail clips, post caps, and bottom rails on the truck. Call (754) 354-3720 and tell us what the fence is doing. We’ll ask a few questions, give you a written estimate for the repair or the full replacement, and you decide.
FAQs
Expect 15 to 25 years from Boral panels in Fort Lauderdale, with the salt air on the east side of US-1 and constant afternoon sun putting you closer to the 15-year mark without any maintenance. Posts usually outlast panels if the footings were poured deep enough, but a bad concrete pour shortens the whole fence’s useful life by a decade.
Small cracks at the bottom of a panel can often be reinforced and sealed to buy you a few more seasons, but a cracked top or bottom rail typically needs that rail replaced since Boral rails carry the panel’s structure. If the foam core inside has swelled, the panel is done and patch work just hides the problem until the next storm.
A standard 100 to 120 linear foot installation with existing fence demo takes two full days: day one for demo, footing digging, and post setting, day two for panel installation and gate hardware. We schedule the concrete to cure overnight even in Florida heat, because setting panels the same day as the posts is how you wind up with a saggy fence by August.
We stock Boral-compatible rail clips, post caps, bottom rails, and gate hardware on our trucks, and we can source full Boral panels from our local supplier usually within a week. If your specific Boral color or profile is discontinued, we’ll show you the closest aftermarket match before we order anything. Call (754) 354-3720 and we’ll check what’s available for your fence model while you’re on the phone.
Call (754) 354-3720 to schedule a free estimate for Boral fence installation in Fort Lauderdale. Isaac Pruett will look at your fence, tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
