Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
If you’re searching for CertainTeed kitchen remodeling in Fort Lauderdale, you’re likely holding a product spec sheet or staring at a cabinet, countertop, or trim piece that isn’t performing the way it should. Full CertainTeed kitchen remodels in Fort Lauderdale typically run $14,000 to $45,000 installed, depending on kitchen size, material grade, and how much of the existing layout changes. We stock and install CertainTeed-compatible kitchen components, and we match replacement parts to your exact model before we ever quote a number.
Most homeowners call us after a drawer face delaminates in the humidity, a corner joint opens up on a cabinet box, or a countertop edge starts pulling away from the substrate. South Florida moisture is relentless, and even well-made products show it eventually. We tell you what we found, what it takes to fix it, and what it will cost – before we touch a thing.
Mason Remodeling Co Fort Lauderdale is an independent service provider. We are not affiliated with or endorsed by CertainTeed.
Which CertainTeed Models This Applies To
CertainTeed’s kitchen product line runs across several series and material grades, and the replacement part you need depends almost entirely on which one you have. The two most common in Fort Lauderdale homes are the EverTone and Restoration Classic lines, though we also see older Landmark-era cabinetry and trim in homes built before 2005. Each series uses slightly different hinge spacing, drawer slide mounting depths, and edge-banding thicknesses, which means a part labeled “universal” rarely fits correctly.
The fastest way to identify what you have is to check inside the cabinet door or drawer box for a printed label: CertainTeed stamps the series name, production date, and sometimes a batch code on a white sticker near the hinge pocket. If the label is gone, measure the drawer slide mounting screw spacing in millimeters: EverTone boxes run 32mm system drilling, while older Restoration Classic units used 35mm. Half the parts we order for CertainTeed kitchens are misordered because someone guessed instead of measured.
OEM parts keep your warranty intact and match the original finish exactly. Quality aftermarket equivalents cost 20% to 40% less and often use identical substrates, but the finish tone may drift slightly from your existing panels, especially on lighter stains that have aged under Florida sun through kitchen windows. For visible surfaces like drawer fronts and crown molding, we recommend OEM. For internal hardware like slides and hinges, a quality aftermarket equivalent saves real money with no visible difference. We carry common KraftMaid, Cambria, and Silestone hardware on the truck as well, but CertainTeed-specific parts are ordered to match, not substituted blindly.
Styles & brands we work with
Signs Your CertainTeed Kitchen Remodeling Is Failing
- Edge banding peeling on doors and drawer fronts. South Florida’s humidity and heat cycles soften the adhesive, and the first place it fails is usually above the dishwasher or near the range. This is a veneer re-adhesion repair, usually not a full door replacement.
- Drawer slides grinding or the drawer sits at an angle. Salt air corrosion from Fort Lauderdale’s coastal exposure works on the ball bearings inside the slide. Once one side binds, the drawer torques and the slide mounting screws start stripping out of the box side.
- Cabinet doors that won’t stay closed or hang unevenly. Hinge fatigue is the culprit nearly every time, especially on oversized doors that carry more weight than the hinge was rated for. Adjusting only masks the problem; the hinge cup drift worsens within weeks.
- Soft-close mechanisms slamming shut. The hydraulic damping piston inside the hinge or slide has lost its fluid, which happens faster in high-heat kitchens. It’s a small part, but it means the entire hinge or slide needs replacement, not lubrication.
- Countertop seams separating or corners chipping along the sink. CertainTeed solid surface and composite tops expand and contract with Fort Lauderdale’s temperature swings, and seams that were tight at installation open by 1/16 to 1/8 inch over five to seven years. Chipping near undermount sinks is usually impact damage from heavy pots.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full CertainTeed kitchen remodeling in Fort Lauderdale runs $14,000 to $45,000 installed based on kitchen size, cabinetry grade, countertop material, and whether plumbing or electrical moves. For readers replacing specific failed parts rather than doing a full remodel, here’s the realistic breakdown in this market:
- Cabinet door or drawer front replacement: $180 to $450 per door, OEM CertainTeed finish-matched
- Drawer slide replacement (both sides, soft-close): $90 to $220 per drawer installed
- Hinge replacement (full kitchen, soft-close): $350 to $900 installed
- Countertop seam repair: $300 to $800 per seam
- Edge banding repair (per 10 linear feet): $150 to $400
- Cabinet box corner reinforcement: $75 to $200 per corner
Every quote we give includes parts, labor, disposal of removed materials, and a written price before any work starts. The 365-Day Done Right Promise applies to every repair and installation: if something we fixed fails within a year, we return and make it right at no cost. That’s 365 days from the completion date, stated in writing, not as a verbal assurance.
DIY or Call Us?
Some checks and fixes are genuinely safe for a homeowner to handle. Adjusting hinge screws, tightening a loose pull, cleaning slide tracks with a dry lubricant, and checking for a separated seam are all reasonable, low-risk tasks. None of these involve structural removal or tools that can damage the cabinet box.
What goes wrong in DIY is what we see most often on follow-up service calls in Fort Lauderdale: stripped-out hinge screws that were forced into a wallowed hole, drawer slides installed 2mm off parallel so the drawer binds, veneer peeled back by a heat gun held too long, and countertop seams “filled” with hardware store caulk that hardens, cracks, and makes the real repair cost more. CertainTeed’s 32mm and 35mm system drilling tolerances are tight – if the slide is off by even a fraction, the drawer never tracks right. Cabinet boxes that get cracked during part removal usually mean the whole box gets damaged beyond repair.
If it’s a broken hinge or a sticky drawer slide, the repair is fast and usually costs less than most people expect. Call (754) 354-3720 and describe what’s failing. We’ll tell you over the phone whether it’s a quick fix, what the likely causes are, and what the visit will likely cost.
FAQs
CertainTeed kitchen cabinets typically last 15 to 25 years in Fort Lauderdale homes, though coastal humidity and proximity to salt air can shorten the life of hinges, slides, and edge banding to 7 to 12 years. The cabinet boxes usually outlast the moving parts and veneer, which is why targeted part replacement is often the smarter repair than full replacement. Call (754) 354-3720 for a free estimate and we’ll assess what’s actually failing versus what still has life in it.
Yes, most CertainTeed cabinet failures are repairable: hinges, slides, edge banding, corner joints, and drawer boxes can all be fixed or replaced individually without tearing out the entire kitchen. The exception is water-damaged particleboard boxes, which usually swell beyond repair and mean the cabinet base itself needs replacing. Call (754) 354-3720 with the symptom and we’ll give you a straight answer on repair versus replacement.
A hinge or drawer slide swap typically takes one to two hours on site, while finish-matched door and drawer front replacements take five to ten business days for order and one day for installation. Countertop seam repairs usually take two to three hours including cure time before the surface is usable. We’ll give you a written time frame on your quote before any work starts.
We stock common soft-close hinges, drawer slides, mounting screws, and edge banding material on the truck for same-visit repairs, but CertainTeed finish-matched doors, drawer fronts, and specific series hardware are ordered to match your exact model and batch. Ordering OEM or exact-match equivalents keeps the finish uniform, which matters more on visible surfaces than on internal hardware. Call (754) 354-3720 with your model number or a photo of the label, and we’ll check availability before scheduling.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
