Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Kitchen Remodeling: The Fort Lauderdale Owner’s Guide
A full GAF kitchen remodel in Fort Lauderdale typically runs $14,000 to $45,000 installed, depending on cabinet line, countertop material, and how much plumbing and electrical work the layout change demands. Smaller kitchens with stock cabinets and laminate counters can come in around $9,000 to $20,000. Most homeowners call us after living with a kitchen that limps along: drawers that stick, a counter with a seam that’s pulling apart, a backsplash that was never sealed right against Florida humidity, or an island that’s too small for how the family actually cooks.
Here’s the thing about GAF specifically. GAF is a roofing materials manufacturer, and when you search “GAF kitchen remodeling,” what you’re usually looking for is a contractor who works with specification-grade materials across the whole project, including GAF’s roofing lines if your kitchen addition or bump-out ties into the roof. We’re an independent remodeling company in Fort Lauderdale, not affiliated with GAF, but we specify and install GAF products on kitchen projects that involve exterior work, roof tie-ins, or additions. We also stock and work with KraftMaid, Cambria, and Silestone for the interior side of the job.
Which GAF Products This Applies To
When a Fort Lauderdale kitchen remodel touches the roofline, you’re dealing with one of a few GAF scenarios. The most common is a kitchen bump-out or addition where the new section ties into the existing roof. GAF Timberline HDZ and Timberline UHDZ shingles are the two lines we install most on those tie-ins, and the compatibility question is whether the existing roof can accept a seamless match. GAF’s color-matching across shingle lots is better than most, but a roof that’s more than six or eight years old will show a visible line where new shingles meet old, no matter how careful the match. We tell homeowners that before we ever quote the kitchen work.
OEM versus aftermarket matters less for shingles than for the underlayment you don’t see. GAF’s Deck-Armor and Tiger Paw underlayments are engineered for South Florida’s moisture load, and they’re not a place to save money with a generic felt substitute. We use GAF accessories on any kitchen addition that opens the roof deck. If you’re trying to identify an existing GAF product, check the roof-side label under the shingle tab, or call us and we’ll identify it from the job site. We’ve hauled more than a few mismatched shingles off Fort Lauderdale homes where a previous contractor tried to save $300 on underlayment and the homeowner paid for it in ceiling stains two rainy seasons later.
Styles & brands we work with
Signs Your Kitchen Remodel Is Failing
- Cabinet faces pulling away from the boxes. South Florida’s humidity cycle, dry from the AC and wet from the outside air, makes wood and MDF expand and contract constantly. Hinges that worked fine for five years start to bind or sag because the box itself has moved. It’s usually a moisture or install problem, not a hinge problem.
- Counter seam opening up. On a quartz or solid-surface counter, the seam between slabs should be nearly invisible. If you can catch a fingernail on it, or it’s darkened with grime, the adhesive has failed. On a GAF project that ties into exterior work, a shifting addition can pull the base cabinets just enough to stress that seam.
- Backsplash grout cracking or falling out in corners. That’s movement. A wall that flexes, a cabinet run that’s settling, or a bad original fit. It always starts in the corner joints, and it always gets worse before it gets better.
- Soft spots at the wall-to-roof intersection. On a kitchen addition, water wicks in where the new roof plane meets the existing wall. By the time you see a water stain under the upper cabinets, the underlayment has been wet for a while. This is the one to call about the same day you notice it.
- Island electrical or plumbing that keeps tripping or leaking. Undersized wiring, a GFCI that was never installed, or a water line that’s kinked behind the drawer stack. These are usually defects from the original install, not normal wear.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Our Fort Lauderdale kitchen remodel pricing lands between $14,000 and $45,000, with the big swing factors being cabinet construction (stock versus semi-custom versus full custom), countertop material (laminate at the low end, Cambria or Silestone quartz at the high end), and how much the layout moves. A cabinet-and-counter refresh in place stays near the bottom of that range. Moving the sink, adding an island, or opening a wall to the living room pushes toward the top. You get a written price before any work starts, every time. That’s not a promotion. It’s how Mason Remodeling has operated since 2004 under the Threshold Standard: the price is on paper, the crew is verified by name and photo before they arrive, and the work is covered by a written guarantee, 365 days from completion. If something fails in that year, we come back and fix it at no charge.
DIY or Call Us?
You can do a few things yourself. Check under the sink for slow leaks, run your hand along cabinet seams for movement, note where the counter meets the backsplash and whether the caulk line is intact. Take measurements of the room and think about what you actually need versus what you’d like. That homework makes our first visit faster and the quote more accurate. What you shouldn’t do is pull a cabinet off the wall, move plumbing, or open any wall that might contain electrical without knowing what’s back there. Kitchen electrical in older Fort Lauderdale homes, especially Victoria Park, Coral Ridge, and Sailboat Bend, can be a maze of DIY work from the 1960s and 70s. We tell you what we found, what it takes to fix it, and what it will cost before we touch a thing. Call (754) 354-3720 and Isaac Pruett or one of our project leads will walk you through what you’re seeing.
FAQs
A properly installed kitchen remodel should give you 15 to 25 years of daily use in Fort Lauderdale’s climate, with cabinets holding up longest and counters depending on material. Quartz like Silestone and Cambria will outlast laminate by a decade or more. The Florida wildcard is moisture: any install that skips sealing or uses the wrong underlayment will fail in three to five years, which is exactly why our 365-Day Done Right Promise covers your full first year so problems show themselves on our dime, not yours. Call (754) 354-3720 to talk through what your existing kitchen is telling you.
Sometimes yes: a sagging cabinet door, a bad hinge row, or a resealed counter seam can often be fixed without ripping everything out. But if the failure is structural, like a shifting addition or water damage behind the backsplash, repair means removing what’s there anyway. We’ll tell you which situation you’re in during the estimate, and the estimate is free. Call (754) 354-3720 and we’ll come look.
A typical Fort Lauderdale kitchen remodel runs 4 to 8 weeks from demo to final walkthrough, with cabinet delivery being the biggest schedule variable. Custom and semi-custom lines like KraftMaid run 4 to 6 weeks from order to delivery. We order materials only after you’ve approved the written price, so the timeline starts when the contract is signed, not before.
We keep GAF Timberline HDZ shingles, Deck-Armor underlayment, and ridge accessories in our Fort Lauderdale material inventory for kitchen additions and bump-outs. If your project needs a color we don’t have on hand, our supplier has same-week availability on most GAF lines in Broward County. Call (754) 354-3720 and we’ll check stock while you’re on the phone.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
