Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Fort Lauderdale Owner’s Guide
If you have a Schluter shower system or waterproofing membrane that’s failing, a full Schluter bathroom remodel in Fort Lauderdale typically runs $9,000 to $28,000 installed, and we can usually start within a week or two depending on scope. Most homeowners don’t discover the problem until they see water staining on the ceiling below the bathroom, loose tiles, or grout that stays dark and wet long after the shower’s last use. What started as a small leak at a Kerdi seam or a drain flange has, by the time it’s visible, usually been working behind the walls for months.
We’re Mason Remodeling Co Fort Lauderdale, and we work with Schluter systems every week. We’re an independent service provider, not affiliated with Schluter Systems, but we stock Schluter-branded parts and know the product line well enough to tell you honestly what’s worth fixing and what needs a full tear-out. Isaac Pruett runs our Fort Lauderdale operation, and he’ll tell you the same thing he tells every client who calls about a failing Schluter install: the waterproofing is only as good as the person who put it in.
Key Takeaways:
- Schluter bathroom remodels in Fort Lauderdale cost $9,000 – $28,000 installed, depending on shower size, floor area, and what’s behind the existing tile.
- Most Schluter failures are installation errors, not product defects: unbanded seams, wrong thin-set, missing corner pieces, or screws through the membrane.
- We verify who’s coming: every technician is background-checked, uniformed, and you get their name and photo before they arrive.
- Written price before any work starts. Every time. No verbal estimates that grow.
- 365-Day Done Right Promise: if the work isn’t right within a year, we fix it at no cost to you.
Which Schluter Models This Applies To
We work across the full Schluter bathroom line, but the systems we see most often in Fort Lauderdale homes are the Kerdi-Board shower walls, Kerdi-Shower trays and curbs, Ditra underlayment on bathroom floors, and the Kerdi-Drain assemblies. If your shower was built with orange membrane, gray foam board, or an orange uncoupling mat under the floor tile, it’s Schluter, and we can match the part. The compatibility gotcha most owners miss: Kerdi membrane and Kerdi-Board are not interchangeable as field materials in every configuration. You can use Kerdi-Band to bridge Kerdi-Board seams and transitions, but a Kerdi-Board shower needs Kerdi-Band at every seam and screw head, not just a bead of sealant. Skip that step and you’re looking at the exact failure we tear out every month.
For the OEM-versus-aftermarket decision: Schluter’s warranty only applies when the full system is installed with Schluter thin-set, Schluter parts, and a professional who follows the install handbook to the letter. Aftermarket equivalents for drains and valves exist, but we don’t use them on Schluter jobs. The flange profiles, bonding flange heights, and grate assemblies don’t cross-brand cleanly, and saving $80 on a generic drain collar isn’t worth voiding a waterproofing system you’ll live with for twenty years. We stock genuine Schluter parts on the truck: Kerdi-Band, inside and outside corners, pipe seals, mixing valve seals, drain grates, and edge profiles in the common finishes.
Styles & brands we work with
Signs Your Schluter Bathroom Remodeling Is Failing
- Staining or sagging ceiling below the bathroom. Water has made it through the waterproofing layer and is pooling on the subfloor or ceiling drywall. By the time you see it, the leak has been active for weeks or months, not days.
- Tiles that have gone hollow or popped loose in the shower. The thin-set bond failed, usually because the wrong type was used over Kerdi. Schluter requires unmodified thin-set between membrane and tile; modified thin-set won’t cure properly against the waterproofing and the tile eventually lets go.
- Grout lines that stay dark after drying. Water is wicking behind the grout, which means the membrane underneath has been compromised or wasn’t joined correctly at a seam.
- Efflorescence, mildew, or a musty smell that cleaning won’t fix. That’s moisture trapped inside the wall cavity. Schluter systems don’t grow mold on the membrane itself, but saturated framing behind it certainly will.
- Water beading up around the drain or at the shower curb. The Kerdi-Drain bonding flange has separated from the membrane or the curb wasn’t wrapped correctly. This is a structural waterproofing failure, not a caulk fix.
Replacement Cost & What’s Included
In Fort Lauderdale, replacing and remodeling a Schluter bathroom runs $9,000 to $28,000 installed. On the lower end, you’re looking at a standard 5×8 bathroom with tub-to-shower conversion, and on the upper end, a larger master bath with a custom Kerdi-Board shower, bench, niche, full floor tile with Ditra, and higher-end fixtures. What drives the range is what’s behind the existing tile. If the framing is sound and we’re only replacing waterproofing, tile, and fixtures, you stay near the lower half. If we’re pulling rotted studs, sistering joists, or redoing plumbing rough-ins, the number climbs, and you’ll know exactly why because we show you what we found.
Every quote includes tear-out and disposal, waterproofing materials, tile and setting labor, fixtures, and a written line-item price before any work starts. No change orders unless you change the scope. Our workmanship warranty runs 365 days from completion. If it fails within that year, we come back and fix it free under our Done Right Promise, no dispute process.
DIY or Call Us?
If you have a failed Schluter bathroom, the honest answer is: this isn’t a DIY repair job. Waterproofing is a system. You can’t patch a Kerdi seam from the front side of the tile and expect it to hold. The tile has to come off, the membrane has to be inspected and bonded correctly, and the whole assembly has to be rebuilt in the right sequence. Schluter makes no allowance for field-spliced membrane repairs that hold water, and neither do we. What you can safely do yourself: shut off the water to that bathroom, run a dehumidifier, and take photos of the damage before calling us. That’s it. Don’t caulk over it. Caulk over a failed waterproofing seam traps the water and makes the framing rot faster.
We tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. Call (754) 354-3720 and we’ll schedule a free estimate. A live person answers every call, any hour, any day.
See the difference
Before
After
Before
After
Before
AfterHow much does a Schluter bathroom remodel cost in Fort Lauderdale?
A Schluter bathroom remodel in Fort Lauderdale typically costs between $9,000 and $28,000 installed, with most standard bathrooms landing in the $12,000 to $18,000 range. The spread depends on shower size, whether you’re keeping the existing footprint or changing it, fixture choices, and the condition of the framing once we open the walls. For a small bathroom with a basic Kerdi shower kit and standard tile, you’re looking at the $5,000 to $12,000 range, while a larger master bath with a custom Kerdi-Board shower, bench, and premium tile pushes toward the upper end. Call (754) 354-3720 for an exact quote, estimates are free and the price is in writing before any work starts.
Can a failed Schluter shower be repaired without a full remodel?
Not reliably. A Schluter waterproofing failure is a seam, screw-penetration, or drain-flange issue under the tile, and you can’t fix it from the surface. Any repair that doesn’t expose and re-bond the membrane will leak again, usually within months. We assess every failure honestly: if it’s a small curb or corner issue caught early, we may be able to do a targeted tear-out and rebuild of that section, but most failed Schluter installs in Fort Lauderdale require a full shower rebuild to be right. Call (754) 354-3720 to have us look at it before you spend money on a patch job.
How long does a Schluter bathroom remodel take?
Most Schluter bathroom remodels in Fort Lauderdale take 2 to 3 weeks from demolition to final grout and fixture trim, with larger custom showers or floor drainage work running 4 to 6 weeks. The biggest variable is what we find when the old tile comes off: rotted framing, mis-vented plumbing, or previous waterproofing failures that spread behind adjacent walls. We give you a written schedule with the estimate, and we stick to it barring weather or hidden damage, which we document and show you before proceeding. Call (754) 354-3720 to schedule your free estimate and get a timeline specific to your bathroom.
Do you stock Schluter parts on the truck?
Yes. We stock genuine Schluter Kerdi-Band, inside and outside corners, pipe seals, mixing valve seals, drain grates, and edge profiles on our Fort Lauderdale trucks so replacement jobs don’t stall waiting for a part run. We also carry KraftMaid, Cambria, and Silestone product lines for the surrounding vanity and countertop work, so the bathroom comes together in one scope. Call (754) 354-3720 and we’ll confirm parts availability before the crew arrives.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
