Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Fence Installation: The Fort Lauderdale Owner’s Guide
Cambria fence installation in Fort Lauderdale typically runs $3,500 – $9,000 fully installed, depending on linear footage, fence height, and whether we’re pulling and resetting existing posts or sinking new ones. We stock Cambria-compatible fence panels and hardware, and our crews do this swap regularly across Broward County. Most homeowners find us because something failed: a post heaved in sandy soil, a gate sagged off its hinges after a summer of salt air, or a panel split during hurricane-season wind.
We tell you what we found, what it takes to fix it, and what it will cost – before we touch a thing. That’s not a slogan. It’s how we run every job, including the ones that look simple and turn out to be anything but.
Which Cambria Models This Applies To
Cambria makes a range of quartz surface products, but if you’re searching for Cambria fence installation, chances are you have one of two things: a Cambria-branded vinyl or composite privacy fence line, or a custom fence integrated with Cambria quartz post caps and accent panels. The compatibility gotcha most people miss: Cambria fence systems use a 5×5 post profile with a proprietary rail bracket, not the more common 4×4 or 5×4 you’ll find at a big-box store. Measure your post dimensions before ordering anything. If the post measures 5×5 nominal, you’re working with the Cambria spec.
For replacement parts, OEM Cambria components are the safe bet for color match and bracket fit. Quality aftermarket equivalents exist for rails and pickets, but we’ve seen color drift on off-brand panels after two or three Florida summers. If your fence is under ten years old and you care about curb appeal, OEM is worth the premium. Older fences with faded color get a pass – aftermarket matches fine when everything’s sun-bleached anyway. We also stock parts for KraftMaid, Silestone, and Kohler, so if the fence project is part of a bigger exterior or interior refresh, we can handle it in one pass.
Styles & brands we work with
Signs Your Cambria Fence Installation Is Failing
- Posts leaning or heaving. Fort Lauderdale’s sandy, high-water-table soil doesn’t hold posts the way clay does up north. If your post bases are pulling out of the ground or tilting after heavy rain, the footing wasn’t deep enough or lacked proper drainage. This fails first on most fences we inspect.
- Rails pulling loose from posts. The Cambria rail bracket is a friction-fit design. Over time, thermal expansion in South Florida heat works brackets loose. You’ll see gaps where rails meet posts, or the fence will rattle when the wind picks up off the Intracoastal.
- Pickets cracking at the bottom edge. This is the salt-and-sun combo. UV breaks down the surface, salt air works into micro-cracks, and the picket eventually splits. It’s almost always the bottom six inches, where sprinkler water bounces up and accelerates the damage.
- Gate dragging or not latching. In Victoria Park and Rio Vista, we regularly see gates that swung fine in January and drag by July. The post has settled, the hinges have worn, or the gate frame itself has racked out of square. A dragging gate wears out the latch fast, and then you have a security problem.
- White chalky residue on panels. That’s oxidation, and it’s normal for vinyl and composite materials in salt-heavy air. Light oxidation is cosmetic. Heavy oxidation means the surface layer is breaking down, and the panel will need replacement sooner than later.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Cambria fence replacement in Fort Lauderdale runs $3,500 – $9,000. The range breaks down like this: material costs run roughly $22 – $38 per linear foot for panels and rails, $60 – $120 per post, plus hardware. Labor runs $15 – $25 per linear foot depending on access, demo of the old fence, and whether we’re pouring new concrete footings.
- Small yard, 50 – 60 linear feet, basic swap: $3,500 – $4,500
- Typical Fort Lauderdale lot, 80 – 120 linear feet, new posts: $5,500 – $7,000
- Large lot or difficult access, 150+ feet, concrete demo, custom gate: $8,000 – $9,000+
What’s included: full demo and haul-away of the old fence, new or reset posts as needed, new rails, pickets, brackets, and hardware, plus a written line-item breakdown before any work starts. We don’t do change orders, and we don’t come back with a bill that doesn’t match the written price. The labor is covered by our 365-Day Done Right Promise: if anything we installed isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
Fence replacement isn’t dangerous like high-tension springs or electrical work, so there’s room for capable DIY on a small section. You can pop a damaged picket off and snap a new one in if the rail is still solid. You can tighten brackets and re-level a gate with shims. What goes wrong for homeowners is the post work. Digging in Fort Lauderdale means hitting roots, sand that collapses, and a water table that fills your hole while you’re working. Undersized or shallow footings are why so many “new” fences in this city lean within two years. Hauling off 120 feet of old vinyl also isn’t a job for a sedan and a Saturday.
If the posts are moving, the rails are pulling, or the gate doesn’t close, call us at (754) 354-3720. We’ll measure, quote, and schedule. You’ll know exactly who’s coming, the price is in writing, and if it’s not right, we come back free.
FAQs
A properly installed Cambria vinyl or composite fence in Fort Lauderdale lasts 15 – 20 years before panels need replacement. The posts, if set in concrete below the soil line, can outlast the panels. Salt air and direct sun shorten the lifespan of poorly ventilated panels, but the biggest killer here is post installation, not material failure. Call (754) 354-3720 and we’ll assess whether you have a panel problem or a footing problem before quoting a full replacement.
Yes, if the posts are still solid and square. Individual pickets, rails, and brackets can be swapped in sections. If more than 30% of the fence is failing, replacement usually costs less per year of remaining life. We’ll give you an honest recommendation either way – we don’t sell full replacements when a repair gets you another five years.
Most Fort Lauderdale fence replacements take two to three working days from demo to final walk-through. One day to remove the old fence and set posts, one day to hang rails and pickets, and a half day for gate hardware and cleanup. Custom gates or large lots can add a day.
We carry common Cambria-compatible rails, brackets, pickets, post caps, and gate hardware on our trucks. Odd-size panels or special-order colors get sourced before we schedule your install, so there’s no mid-job surprise. Call (754) 354-3720 with your measurements and we’ll confirm parts availability before you commit.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
