Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Fort Lauderdale Owner’s Guide
We stock and install KraftMaid-compatible window and door replacement parts across Fort Lauderdale, with most hardware swaps running $180–$640 installed and full window or door replacements typically landing between $4,500 and $15,000. If your KraftMaid window won’t latch, your door drags against the frame, or a roller has given out, we can usually get the right part matched and installed within a few days of your call. Most owners discover a failure the hard way: a window that suddenly won’t stay open in the middle of a Florida afternoon, or a patio door that needs two hands and a hip-check to move. The good news is that KraftMaid’s hardware is standardized enough that the fix is usually straightforward once you know what you’re looking at.
One thing to know before we go further: Mason Remodeling Co Fort Lauderdale is an independent service provider. We are not affiliated with KraftMaid, and we don’t pretend to be. What we are is a Fort Lauderdale remodeling and repair company that has spent years working with KraftMaid cabinetry and the window and door systems that go with it, so we know these parts from the inside out.
Which KraftMaid Models This Applies To
KraftMaid is primarily a cabinetry brand, and the windows and doors we handle are typically part of a broader kitchen, bath, or whole-home install where KraftMaid cabinetry surrounds or integrates with window and door openings. The specific hardware involved — hinges, rollers, latches, tracks, and weatherstripping — varies by the door or window manufacturer, but the compatibility question is the same every time: what is the exact size, offset, and mounting pattern of the part that failed.
Here’s the gotcha most people miss: two hinges can look identical and be off by three millimeters. The wrong offset means the door will bind or the window sash won’t seat, no matter how carefully you install it. We identify the correct part by measuring the existing hardware, checking the manufacturer stamp on the door or window frame, and cross-referencing the reveal and gap tolerances. When an OEM KraftMaid-specified part is available, we use it. When it’s discontinued or backordered for months — which happens more often than you’d think with older lines — we match a quality aftermarket equivalent, and we tell you upfront which path we’re taking and why. In Fort Lauderdale, we also stock parts for systems from Cambria, Silestone, and Kohler on our trucks, so a mixed-brand kitchen or bath doesn’t mean three separate service calls.
Styles & brands we work with
Signs Your KraftMaid Windows & Doors Are Failing
- Windows that drop when you open them. This is almost always a failed or disengaged spring balance in the sash track. In Florida’s humidity, the metal springs inside those tubes corrode faster than you’d expect, and once one side lets go, the window tilts and jams.
- A sliding door that feels like it weighs four hundred pounds. Rollers are usually the culprit. Fort Lauderdale’s salt air and fine sand work their way into the roller bearings, and once they seize, the door grinds metal-on-metal in the track. Left alone, it’ll chew up the track too.
- A French door that scrapes the threshold on the strike side. Doors settle as houses shift — and Fort Lauderdale homes shift constantly with the summer rain and winter dry spells. The hinge screws back out of the jamb, the door drops a quarter inch, and suddenly you’re lifting the handle to close it.
- Latches and locks that no longer line up. When a door drops even slightly, the latch bolt misses the strike plate. People blame the lock, replace the lock, and the door still won’t catch. The problem is the door, not the hardware.
- Windows that won’t seal, with condensation between the panes. A failed insulated glass unit shows up as fog or moisture you can’t wipe away. Once the seal fails, the only real fix is replacing the IGU or the sash.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the real numbers for Fort Lauderdale, based on what we see across Victoria Park, Rio Vista, Coral Ridge, and the older neighborhoods east of US-1 where KraftMaid kitchens from the 2000s are everywhere:
- Roller replacement on a sliding patio door: $180–$340 including parts and labor, assuming the track is still sound.
- Hinge replacement and door re-hang: $220–$480, depending on how far the door has dropped and whether the jamb needs any packing or tightening.
- Spring balance replacement on a double-hung window: $160–$300 per window, parts included.
- Latch, lock, or strike plate alignment: $120–$250, including replacement hardware if the original is beyond adjusting.
- Full window replacement (when the sash or frame is gone): $4,500–$15,000 for a typical Fort Lauderdale home, depending on how many windows and whether impact-rated glass is required — which it often is east of Federal Highway.
- Full door replacement: typically $6,000–$18,000 when it’s part of a larger opening or exterior wall scope.
Every quote is a written line-item price before any work starts. No verbal ballparks that grow on the final bill, no change orders unless you ask us to add scope. The workmanship on parts and hardware replacement is covered by our 365-Day Done Right Promise: if it’s not right within a year of completion, we make it right at no cost to you. Period.
DIY or Call Us?
Some things are worth checking yourself before you pick up the phone. You can look at the bottom track of a sliding door and see if it’s packed with sand and pet hair — clean that out with a vacuum and a damp rag, and sometimes the door glides fine again. You can tighten a loose hinge screw with a screwdriver. You can check whether the strike plate on a door frame is visibly misaligned from the latch.
What you shouldn’t do is try to replace a spring balance on a double-hung window. Those springs are under serious tension, and when they let go during disassembly, they can take a hunk of skin or a finger with them. Same caution goes for any part that involves lifting a heavy door off its track while standing under it. We’ve repaired enough DIY attempts in Fort Lauderdale to say this plainly: the money you save is rarely worth the damage or the injury. We tell you what we found, what it takes to fix it, and what it will cost — before we touch a thing. Call (754) 354-3720 and we’ll put a live person on the line, day or night.
FAQs
In our experience, the cabinetry frames can easily last 20 to 25 years, but the operational hardware — rollers, hinges, balances, weatherstripping — typically starts showing age between years 8 and 12 in Fort Lauderdale’s salt-and-humidity environment. Coastal homes east of US-1 may see failures a couple years sooner. If your parts are original and your home is from the mid-2000s, you’re right in the window. Call (754) 354-3720 and we can tell you whether a hardware swap is all you need or whether you’re looking at a bigger scope.
Sometimes. A bent hinge can sometimes be re-set, a misaligned strike plate can be moved, and a sticky track can almost always be cleaned. But a seized roller bearing can’t be un-seized, a snapped spring balance can’t be re-sprung, and a failed insulated glass unit can’t be re-sealed. We’ll tell you straight which category yours falls into. Call (754) 354-3720 to schedule a look — the estimate is free.
Most hardware replacements — rollers, hinges, balances, latches — take under two hours start to finish, including clean-up and testing the door or window a few times to be sure it moves the way it should. If you have multiple doors or windows with the same issue, we can usually do all of them in a single visit. Full window or door replacements are a different story, and we’ll give you a written timeline when we quote the job.
We keep the most common rollers, balances, hinges, and weatherstripping on hand in our Fort Lauderdale service trucks, so a good portion of repairs happen in the first visit. When we need a specific OEM part for an older KraftMaid line, we order it and you get a firm date before we schedule the work — not an open-ended “sometime next month” that drags on. Call (754) 354-3720 and tell us what you’re dealing with; we can usually tell you over the phone whether your part is one we stock.
If you’re dealing with a window or door that is fighting you every time you open or close it, don’t wait for the failed part to turn into a damaged frame. Call Mason Remodeling Co Fort Lauderdale at (754) 354-3720 to schedule your free estimate. Isaac Pruett and the team will give you a written price before any work starts, and every part we install is backed by our 365-Day Done Right Promise.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
