Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Roofing: The Fort Lauderdale Owner’s Guide
KraftMaid roofing parts replacement in Fort Lauderdale typically runs $400 – $1,800 installed, depending on the component and the extent of the failure. Most owners discover the problem after a heavy afternoon storm, when water starts showing up where it shouldn’t. We stock the common KraftMaid-compatible roofing components, and the fix is usually handled the same day we diagnose it.
What you’ll usually notice first is a damp patch on the ceiling, a drip near a skylight, or granules collecting in the gutter after every rain. Fort Lauderdale’s summer pattern, hot sun followed by sudden downpours, works roofing parts hard. Sealant dries out, flashing pulls away at the corners, and boots around vent pipes crack. None of these are dramatic failures. They’re slow leaks that get worse with every storm, and they get more expensive the longer they sit.
Which KraftMaid Models This Applies To
KraftMaid is best known for cabinetry, but many Fort Lauderdale homes built in the 1990s and early 2000s used KraftMaid-branded roofing accessories, mainly ventilation boots, flashing kits, and ridge caps, installed alongside the primary shingle system. If your home falls in that age range and the original paperwork lists KraftMaid roofing components, we can match the part.
The first step is identifying what’s actually on your roof. Look for a stamped code on the underside of a vent boot or the edge of a flashing piece. KraftMaid roofing accessories use a three-letter series code followed by a number, which tells us the profile and the material thickness. If the stamp is worn off, we measure the pipe diameter, the boot’s flange width, and the profile angle. Where people get into trouble is assuming any off-the-shelf boot will fit; KraftMaid’s older vent boots used a slightly narrower flange than the standard big-box replacement, which is why a “universal” part often wrinkles and leaks within a year. The OEM part fits correctly. A quality aftermarket equivalent with matched dimensions works fine and usually costs less. The wrong one fails fast, especially in South Florida’s heat.
Styles & brands we work with
Signs Your KraftMaid Roofing Is Failing
- Granules in the gutter after every rain. The asphalt surface of the shingle is breaking down, which happens faster in Fort Lauderdale’s UV-heavy climate. This means the shingle’s protective layer is gone and water absorption has begun. Left alone, the mat underneath starts to crack and split.
- Damp ceiling patches that appear hours after rain stops. This is the classic slow-leak signature. Water travels along a rafter or the underside of the sheathing before it drips where you see it, so the actual entry point is rarely directly above the stain.
- Warped or lifted flashing around the chimney or skylight. Thermal cycling, the daily expansion and contraction from Fort Lauderdale’s heat, breaks the sealant bond over time. Once the flashing lifts even a quarter inch, wind-driven rain gets underneath.
- Cracked or brittle rubber boot around a vent pipe. The rubber collar that seals the pipe is usually the first part to go, especially on the south-facing roof slope where it bakes in the sun. A hairline crack here lets water run straight down the pipe into the attic.
- Missing or cracked ridge caps after a windy season. Ridge caps take the most direct wind exposure. Once one blows off or splits, the peak of the roof is open to wind-driven rain that runs down both slopes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a KraftMaid roofing parts replacement in Fort Lauderdale, here’s what you’re looking at:
- Vent boot replacement: $400 – $700 installed, including the OEM or exact-match aftermarket boot, new storm collar, and sealant.
- Flashing repair or replacement around a chimney, skylight, or wall junction: $600 – $1,200 depending on linear footage and whether the counter-flashing needs to be cut into the mortar or siding.
- Ridge cap replacement (partial): $500 – $900 for a typical Fort Lauderdale ranch or two-story section, including matching shingles and new fasteners.
- Full roof replacement, if the failure has spread beyond a single part: $8,000 – $20,000 for a standard Fort Lauderdale home.
The cost difference comes down to roof height, slope, accessibility, and whether the underlayment beneath the failed part has rotted. We write up a line-item price before any work starts, so you’ll know the part cost, the labor, and the disposal fee separately. If we open up a section and find water damage that changes the scope, we tell you what we found, what it takes to fix it, and what it will cost, before we touch a thing. The work is covered by our 365-Day Done Right Promise from the completion date.
DIY or Call Us?
You can safely check a few things from the ground: look for missing ridge caps, granules collecting in the gutter, or a boot that’s visibly cracked near the pipe. What you shouldn’t do is get on the roof to fix it. Working on a pitched roof in Fort Lauderdale’s heat and afternoon storms is a fast way to end up in an emergency room, especially on tile or metal. A roof repair means working at height with tools, and a fall from even a single-story roof causes serious injury. Beyond the safety, the material match matters. If you put the wrong boot or flashing on, you’ll be back in the same spot next rainy season. Call (754) 354-3720 and we’ll send a uniformed, background-checked technician. You’ll get the name and photo before we arrive, and the technician will show ID at the door.
FAQs
In Fort Lauderdale’s climate, KraftMaid vent boots and flashing typically last 8 – 12 years before the rubber and sealant start breaking down. The sun exposure and salt air shorten the lifespan compared to inland Florida, so we expect to replace vent boots on south-facing roofs closer to the 8-year mark and on north-facing roofs closer to 12. Call (754) 354-3720 for an inspection if your parts are in that age range.
Small cracks in a vent boot can sometimes be sealed for a season, but we don’t recommend it in Fort Lauderdale, where the repair will be stress-tested within weeks. Flashing that has pulled away can often be re-secured and re-sealed if the metal is still sound. A brittle, cracked boot or corroded flashing needs replacement. Call (754) 354-3720 and we’ll tell you which one you have.
Most single-part replacements, a vent boot, a chimney flashing section, a couple of ridge caps, take 2 – 4 hours on site. If we find water damage to the sheathing or underlayment underneath, the job extends to a full day because we cut out the rotted section, replace it, and re-seal before the new part goes on. We’ll give you a time window before we start.
We stock the common KraftMaid-compatible vent boots, storm collars, and standard flashing profiles on our trucks, along with exact-match aftermarket equivalents for the older series. We also carry parts for Cambria, Silestone, and Kohler systems on the truck, so a multi-system home often gets everything addressed in one visit. If your specific part needs to be ordered, we’ll tell you that upfront and get it here in a few days.
If your KraftMaid roofing part is failing, don’t wait for the next storm to make it worse. Call (754) 354-3720 to schedule a free estimate. Isaac Pruett and the Mason Remodeling Co Fort Lauderdale team will get you a written price before any work starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co Fort Lauderdale at Mason Remodeling Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.
